Sharp AM-400 Online Manual page 127

6
. Click the Apply button.
7
. Repeat Steps 4 through 6 for each of events SC2 through SC6 (select Sharp
Button Manager I for each event). When finished, click the OK button to
close the window.
®
Windows 2000
1
. Click the Start button, point to Settings, and select Control Panel.
2
. In the Control Panel, double-click Scanners and Cameras.
3
. Select SHARP AM-400 and click the Properties button.
4
. Click the Events tab in the SHARP AM-400 Properties.
5
. Select SC1 from the Scanner events list.
6
. In Send to this application, select Sharp Button Manager I.
♦
If other applications appear in the list, make sure that none are selected.
7
. Click the Apply button.
8
. Repeat Steps 5 through 7 for each of events SC2 through SC6 (select Sharp
Button Manager I for each event). When finished, click the OK button to
close the window.
♦
To make the new scanner event settings take effect, you must restart your
computer.
Scanning From the Operation Panel
121