Table of Contents
Advertisement
Setting the Remote Control
Code
•
3 types of remote control codes operate this
Player: RC-1, RC-2 and RC-3. If you operate
this Player by remote control along with another
SHARP Blu-ray Disc Player or DVD Player placed
next to it simultaneously, switching the remote
control code (both the Player and remote control)
to one of the signals (RC-1, RC-2 or RC-3) will let
you operate only with this Player.
•
Make sure to set the Player and remote control to
the same remote code. You can not operate the
Player if they are not set to the same code.
Setting the Remote Control
Code of the Remote
Example: Setting the code to "RC-3".
1
Press and hold 3 first and then
POWER on the remote control
together for more than 5 seconds.
2
Press POWER to turn off the player.
POWER
Setting the Remote Control
Code of the Player
3
Point the remote control at the
player, then press and hold the
DISPLAY button.
Remote control sensor
The display on the player changes
as shown below, and the player will
be set to the same number as the
remote control.
Example: Change "RC-1" to "RC-3".
Approx. 2 sec. later
Approx. 3 sec. later
Before Starting Playback
If remote control does not
work
First, press POWER to turn on this player.
Press POWER on the remote control and
check the front panel display (RC-1, RC-2 or
RC-3).
Set the remote control code according to the
display and press POWER to see if you can
turn on/off the Player.
Operating a SHARP TV
Using the Remote Control
The Universal Remote Control may operate the
basic functions of the SHARP TV.
TV function control
•
TV Power: POWER
TV Channel up/down: CH r/s
•
TV Volume up/down: VOL e/f
•
•
TV-AV Selector: INPUT
21
- Quick Links:
- Software Update
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the BD-HP21U and is the answer not in the manual?
Questions and answers
player won't play disc nor will the tray open
The Sharp BD-HP21U player may not play discs or open the tray due to one or more of the following reasons:
1. The disc is incompatible, non-standard, scratched, or loaded upside down. This can trigger error messages like "CANNOT PLAY" or "INCOMPATIBLE DISC," and the tray may pop out automatically.
2. There may be a need to reset the player. Holding the power button until the screen says "reset," then releasing it and restarting the player after one minute, may help resolve some issues.
3. If the disc is read but nothing happens (e.g., blank screen), the issue may be related to the firmware or disc compatibility.
Try checking the disc, resetting the player, and ensuring firmware is up to date.
This answer is automatically generated