Sharp AM-300 Online Manual page 71

Permanent Copy Settings
Default copy contrast setting
The default contrast setting (page 59) is medium (this is the setting that is
used if you do not make a selection). If desired, you can change the default
contrast to a higher or lower level.
1
MENU
Press
until the display at right appears.
2
Press
3
Z
Press
default contrast level.
4
Press
ENTER
5
Press
64
Z
and then or
.
to decrease the default contrast level, or
.
repeatedly to exit.
A
Display:
COPY SETTING
-[ ■ ■ ■ ■
]+
A
to increase the