Receiving Faxes (Am-400 Only); Selecting The Reception Mode - Sharp AM-300 Online Manual

4. Receiving Faxes (AM-400 only)

Selecting the Reception Mode

The machine has two modes for receiving faxes:
FAX ONLY mode:
Select this mode when you only want to receive faxes on your line. The
machine will automatically answer all calls on one ring and receive incoming
faxes. ("FAX" will appear in the fax mode display.)
EXT. TEL mode:
Select this mode when you have connected an extension phone as explained
on page 19 and you want to receive both faxes and voice calls on the line
connected to the machine. All calls, including faxes, must be answered by
picking up the extension phone. ("TEL" will appear in the fax mode display.)
To select the reception mode, follow the steps below.
♦
The reception mode is initially set to FAX ONLY mode.
1
Make sure that the date and time
display of fax mode appears (if needed
FAX
press
2
Press
3
Press
4
Select the reception mode:
: FAX ONLY
5
Press
When FAX ONLY is
selected:
10/03 11:37
98
) and then press
.
.
: EXT. TEL
repeatedly to exit.
FAX
MENU
.
When EXT. TEL is
selected:
10/03 11:37
Display:
FAX SETTING
1:RECEPTION MODE
1: FAX ONLY
The display briefly shows
your selection, then:
2: NUMBER OF RING
TEL