Connecting to Your Computer
The following methods can be used to connect the CF-P1 with a computer.
The use of a Serial Autosync Cable or USB Autosync Cable.
The use of the infrared communication port.
Use an RS-232C Cable or a USB Adaptor Cable to connect CF-P1 with a peripheral.
Using a Cable
CAUTION
For data to be exchanged between the CF-P1 and a computer, separate application soft-
ware needs to be installed on the computer.
Be sure to connect/disconnect the cable after the CF-P1and the computer have been
turned off.
When Connecting the CF-P1 Directly with a Computer
Removing
When Connecting the CF-P1 with a Computer via the Cradle
Removing
Expansion Connector of the CF-P1
USB Autosync Cable
or
Serial Autosync Cable
Expansion Connector of the Cradle
or
23