Find And Save Radio Stations - Silvercrest CRB-531 Instructions Manual

13.3 Find and save radio stations

Search for a station with the station search function
To select the stations, select the desired wave band with the "BAND" button (section 13.2). In order to begin searching in the
desired direction, briefly press one of the buttons " " or " " . The scanner will stop at the next available station.
Manual search for a station
In order to select a station manually, press the buttons " " or " " for about three seconds. The display will indicate
"MANUAL" Now press the buttons " " or " " until the desired frequency appears on the display. The frequency will
change in 50kHz increments in the FM range. If there is no entry for about 7 seconds, the device will switch back to automatic
station search. The display will indicate "AUTO".
Store stations with the station buttons
With the station buttons "1", "2", "3", "4", "5", and "6" ( - ) you can preset 6 programming spaces each on each level of the
wave band (e.g. "FM 1", "FM 2", or "FM 3").
To store the station, select the corresponding station with the station search or manually. Press one of the buttons "1", "2", "3",
"4", "5" or "6" until the radio sound is briefly muted in order to store the station. Now the station is stored at the station button
you selected.
Storing a station with the automatic station search
The automatic station search scans for the strongest available stations and stores these under the station selection buttons "1"
– "6" ( - ).
In order to start the search, press the "AS/PS" button and keep it pressed for more than two seconds. Now the scanner
allocates all station positions at the current level of the selected wave band as long as enough stations with sufficient reception
quality are available. After the scanning has ended, the stored stations are automatically matched up with their station names
and the station stored at the station position "1" can be heard.
Accessing stored stations
In order to access the stored stations, select the desired wave range with the "BAND" button , e.g. "FM 1". Press one of the
six station buttons ( - ) and you will hear the station stored there.
Checking stored stations
For this function, the stations stored under the station buttons of a particular wave length are scanned for about five seconds.
In order to begin checking, briefly press the "AS/PS" button . The station positions "1" – "6" will begin blinking on the display in
sequence and the corresponding stations will be scanned.
22