Contents Product speciÀ cations Troubleshooting Notice Copyright Compliance 10 Index Mains fuse (UK only) Trademarks Important Safety Product care Disposal of your old product and batteries Your home theater Main unit Remote control Connect your home theater Connectors Connect to the TV Connect audio from TV or other devices Use your home theater Before you start...
Notice Note • To conform with the EMC directive Copyright (2004/108/EC), the mains plug on this product must not be detached from the mains cord. Trademarks This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation Manufactured under license under U.S.
Secure the wall mount to a wall that can support the combined weight of the product and the wall mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that results in accident, injury...
• For speakers with stands, use only the Disposal of your old product supplied stands. Secure the stands to the and batteries speakers tightly. Place the assembled stands on fl at, level surfaces that can support the combined weight of the speaker and stand. •...
Your home theater Remote control Congratulations on your purchase, and welcome to Philips! To fully benefi t from the support that Philips offers, register your home theater at www. philips.com/welcome. Main unit Disc compartment ( Open/Close ) Opens or closes the disc compartment.
Page 8
( Navigation buttons ) • Navigate menus. Confi rms an entry or selection. • In video mode, press left or right to Source buttons fast backward or fast forward. • AUDIO SOURCE: Selects an audio input source. • In radio mode, press left or right to search a radio station;...
Connects to the analog audio output on the provided in the Quick Start. For a comprehensive TV or an analog device. interactive guide, see www.connectivityguide. VIDEO OUT philips.com. Connects to the composite video input on the TV. Note FM ANTENNA Connects the FM antenna for radio •...
Option 2: Connect to the TV through Connect audio from TV or Scart other devices (Cable not supplied) Use your home theater to play audio from the TV or other devices such as a cable box. • Press AUDIO SOURCE repeatedly to select the audio output of your connection.
Use your home Change surround sound mode Experience an immersive audio experience with theater surround sound modes. This section helps you use the home theater to play media from a wide range of sources. Before you start Press SURR repeatedly to cycle through the available surround modes.
Use video options Play from a USB storage device Access several useful features while viewing video. The home theater is fi tted with a USB connector that allows you to view pictures, listen to music or Note watch movies stored on a USB storage device. Connect the USB storage device to the •...
Synchronize audio with video Note If the audio and video are not synchronized, you • AM and digital radio are not supported. can delay the audio to match the video. • If no stereo signal is detected, or if fewer than Press and hold AUDIO SYNC until the fi...
Change settings Select the conversion settings in the [OPTIONS] panel, then press OK. • [Speed] : Selects the write-to-fi le This section helps you to change the settings of speed. your home theater. • [Bitrate] : Selects the conversion quality. Caution Press to access the [TRACK] panel.
Change general settings • [Speakers Delay] : Sets the delay time for center and rear speakers to obtain an equal audio transmission from all Press SETUP. the speakers. Select [General Setup], then press OK. • [HDMI Audio] : Enables or disables HDMI audio output for the TV.
SETUP. To check for new updates, compare the current software version of your home theater with the Select [Preference Setup], then press OK. latest software version (if available) on the Philips Select and adjust the following settings: web site. •...
Product AmpliÀ er • Total output power: specifications • HTS5520: 800 W RMS (30% THD) • HTS5530: 1000 W RMS (30% THD) • Frequency response: 20 Hz-20 kHz / ±3dB Note • Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted) •...
Page 18
Speakers support at www.philips.com/welcome. • System: full range satellite If you contact Philips, you will be asked for the model and serial number of your product. The • Speaker impedance: 4 ohm (center), 8 ohm model number and serial number are on the back (Front/Rear) or bottom of your product.
Page 19
Sound The contents of a USB storage device cannot be read. No sound. • Ensure that the format of the USB storage • Ensure that the audio cables are connected device is compatible with the home theater and select the correct input source (for (see ‘Product specifi...
Page 20
10 Index overview connectors main unit ampliÀ er remote control audio connection language 14 , 10 settings password synchronize with video picture slide show troubleshooting play care disc change settings MP3 player connect options audio from TV 8, 11 radio guide troubleshooting other devices...
Page 21
time search video troubleshooting audio from TV 8, 11 connect play software update video options settings synchronize with audio...
Need help?
Do you have a question about the HTS5520 and is the answer not in the manual?
Questions and answers