Page 8
Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Safety Read and understand all instructions before you use this product. If damage is caused by failure to follow the instructions, the warranty does not apply.
• Never expose the product to rain, water, sunshine, or excessive heat. • Avoid force coming onto power plugs. Loose power plugs can cause arcing or fire. Risk of injury or damage to the product! • This product shall not be exposed to dripping or splashing! •...
• a BS 1362 approval, and • the ASTA approval mark. Contact your dealer if you are not sure about what type of fuse to use. Caution: To conform with the EMC directive (2004/108/EC), do not detach the plug from the power cord. How to connect a plug The wires in the power cord are colored as follows: blue = neutral (N), brown = live (L).
Set the clock (Fig. 3) In standby mode, press and hold the knob for 2 seconds. (12-hour time format) or » (24-hour time format) blinks. Turn the knob to select a time format, and then press the knob to confirm. Hour digits blink.
Search for a radio station automatically Press SCAN to activate the auto search. After a strong station is detected, the search stops and the » radio station is broadcast. Search for a radio station manually Turn the knob until the frequency of target radio station is displayed.
Program radio stations manually Tune to a radio station. Press the PROGRAM button to activate the programming. Turn the knob to select a preset sequence number. Press the knob to confirm. The radio station is stored with the selected sequence number. »...
Page 14
• Program type such as [NEWS] (news), [SPORT] (sport), [POP M] (pop music)... • Program service • Mono/Stereo • Time • Date RDS program types Program Description Program Description type type NEWS FINANCE News services Finance AFFAIRS CHILDREN Politics and current Children's affairs programs...
MOR M FOLK M Light music Folk Music LIGHT M DOCUMENT Documentary Light classical music CLASSICS TEST Classical music Alarm Test OTHER M ALARM Special music Alarm programs WEATHER Weather Adjust FM settings In FM mode, press MENU to access FM menus. Turn the knob to toggle through the menus.
Audio setting Press the knob to access sub-menus. Turn the knob to select an option. • <Stereo allowed>: Allow stereo output even if the station transmits weak stereo audio signals. • <Forced mono>: Convert stereo signals to monophonic output even if the station transmits strong stereo audio signals.
Listen to DAB radio stations Note • For optimal reception, fully extend the antenna and adjust its position. • You can program a maximum of 30 DAB radio stations. • Check with local retailer or go to www.WorldDAB.org for applicable DAB radio frequencies in your area. For the first time use (Fig.
• You can re-scan to update the list of stored stations (see "Use DAB menus" > "Re-scan for stations"). • You can tune to a station manually (see "Use DAB menus" > "Tune to a station manually"). About special symbols Some symbol may be displayed before the name of a station.
Note • If you store a radio station with the sequence number of another one, the earlier one is overwritten. Display DAB information On the display of DAB broadcasting, the first line shows station name, and the second line shows the service information for the current station.
Page 20
Tune to a stored station Press the knob to access the list of stored stations. • If no DAB station is stored, the product starts automatic search. Turn the knob to select a station. Press the knob to start listening. Re-scan for stations Full scan is used to perform a wide range search for DAB radio stations.
Page 21
Tune to a station manually With this feature, you can tune to a specific channel/frequency manually. In addition to antenna orientation for better radio reception, the optimal reception can also be obtained with this feature. Press the knob to access the station list. Turn the knob to select a station from 5A to 13F.
Page 22
Turn the knob to select an option. • <DRC off>: No compensation applied. (The asterisk indicates the current setting.) • <DRC low>: Medium compensation applied. • <DRC high>: Maximum compensation applied. Press the knob to confirm the option. Remove invalid stations This option lists active stations and removes any stations that are in the list but have no service in your area.
Turn the knob to select a sub-menu. • For details, refer to the section ‘Use system menus‘. Use system menus Use the system menus to • check the version of current software of this product, • upgrade the software, and •...
Upgrade the software Go to www.philips.com/support. Search for support information about your product with “OR7200/10“ as the keyword. When an upgrade packet is available, the link of “Firmware » Upgrade Readme File“ is accessible. The exact wording of this link name may vary in different languages.
If you encounter problems when using this product, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact Philips, make sure that the product is nearby and the model number and serial number are available. No power •...
Poor radio reception • Due to the interference from other electrics or building obstacles, the signals become weak. Move the product to a place free of interference. • Make sure that the antenna is fully extended. Adjust the position of the antenna.
Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Compliance This product complies with the radio interference requirements of the European Community.
Need help?
Do you have a question about the OR 7200 and is the answer not in the manual?
Questions and answers