Contents 1 Safety 11 Product information Important notes for users in the U.K. General information Tuner Amplifier 2 Your DAB+ Radio Speakers Introduction Bluetooth What's in the box Overview of the product 12 Troubleshooting General 3 Get started About Bluetooth connection Connect power Turn on 13 Notice...
If liquids are spilt on or into the product, by the manufacturer. disconnect it from the power outlet Risk of overheating! immediately. Contact Philips Consumer • Never install this product in a confined Care to have the product checked before space.
Page 5
Caution: To conform with the EMC directive (2004/108/EC), do not detach the plug from the power cord. How to connect a plug The wires in the power cord are colored as follows: blue = neutral (N), brown = live (L). If the colors do not correspond with the colors on your plug, identify the terminals in your plug as follows:...
Digital radio b User manual Congratulations on your purchase, and c Audio in cable welcome to Philips! To fully benefit from the support that Philips offers, register your product d AC power cord at www.philips.com/welcome. e UK power cord...
• Press to switch the system between Overview of the product standby mode and normal mode. • Turn to adjust the volume. a INFO • In FM mode, turn to tune to a radio • Press repeatedly to display available station manually.
3 Get started • Press to enter or exit FM or DAB menus. i LCD screen j AC MAIN~ Always follow the instructions in this chapter in • Connect to the AC power cord. sequence. k AUDIO IN • Connect to an external device by an audio in cable.
4 Listen to FM » Minute digits blink. Turn the knob to set the minute. radio stations Press the knob to confirm. Turn the knob to select whether to synchronize the DAB clock and then press knob to confirm Turn the SOURCE knob to switch the product to FM mode.
Display RDS information Radio Data System (RDS) is a service that allows FM stations to transmit additional information. When you tune to an FM radio station that transmits RDS signals, the station name is displayed. 2 sec. Tune to an RDS station. Press INFO repeatedly to scroll through the following information (if available): •...
• : Convert stereo signals FOLK M Light music Folk Music to monophonic output even if the station transmits strong stereo audio LIGHT DOCU- Light classical Documen- signals. MENT music tary Press the knob to confirm the option. CLAS- TEST Classical music Alarm Test SICS...
5 Listen to DAB • H: The station is one of your 10 favorite stations. radio stations • ?: The station is unavailable or inactive. • : The station is a primary station with secondary service. • : The station is a secondary station. Note Program radio stations •...
• Signal error rate Tune to a station manually • Bitrate codec • Time With this feature, you can tune to a specific • Date channel/frequency manually. In addition to antenna orientation for better radio reception, the optimal reception can also be obtained with Use DAB menus this feature.
6 Use system Remove invalid stations menus This option lists active stations and removes any stations that are in the list but have no service in your area. In front of the station name of an invalid station, a question mark (?) is displayed. Use the system menus to •...
Go to www.philips.com/support. Search for support information about You can also listen to an external audio device, your product with "ORT7500/12" as the for example, MP3 player, through this product. keyword. Turn the SOURCE knob to switch the »...
8 Play audio via On your device, search for Bluetooth devices. In the device list, select ORT7500. Bluetooth • If a message prompts for the permission for Bluetooth connection with ORT7500, confirm it. » If the connection succeeds, [BT Connected] is displayed on the LCD With this product, you can stream audio from a display of this product.
Turn the knob. the back of the product. » Once the device is recognized, the charging starts. Note • Philips does not guarantee the compatibility of this product with all devices. • The USB socket is for charging only.
11 Product Frequency Response 60 Hz - 16 kHz, ±3 dB information Signal to Noise Ratio > 65 dB Aux Input 0.5 V RMS 20 kohm Note Speakers • Product information is subject to change without prior notice. Speaker Impedance 6 ohm Speaker Driver 2 X 3"...
If the problem remains The audio quality is poor after connection unsolved, go to the Philips Web page (www. with a Bluetooth-enabled device. philips.com/support). When you contact Philips, make sure that the product is nearby and the •...
Portable Document Format local regulations regarding the disposal of (PDF) version of the user manual at www. packaging materials, exhausted batteries and old philips.com/support. equipment. Trademark notice This is CLASS II apparatus with double The Bluetooth® word mark and logos are insulation, and no protective earth provided.