Router Does Not Support Wps - Panasonic SC-AP01 Operating Instructions Manual

Compact stereo system
Hide thumbs Also See for SC-AP01:
Table of Contents

Advertisement

Method 2
If your wireless network router does not support
WPS.
With this method, you will access this unit's
wireless network settings from the Internet browser
of your compatible device.
≥ The following explanations are based on an iPhone.
Preparation
≥ Turn on your iPhone.
1
Press and hold both [VOLUME i] and
[– WPS] on this unit for more than 2
seconds.
≥ If the indicator blinks blue, turn the unit off and on
and repeat step 1.
2
Connect your iPhone to this unit's wireless
network named
"Setup _ _ _ _ _ _".*
_ _ _ _ _ _
≥ Once "Setup _ _ _ _ _ _" is selected, continue to
step 3.
3
Start "Safari" on your iPhone and type
"http://192.168.1.12/" into the URL
address field and display the page.
{.
This unit's setup window is displayed.
*1: " _ " stands for a digit that is unique to each set.
*2: Make sure that DHCP is enabled for the network setting on the iPhone.
*3: If you have set your wireless network to be invisible, select "BACK" and refer to "Alternative settings". (
*4: To use the AirPlay function, connect the iPhone to the wireless network selected in step 5. (
Blinks purple
1, 2
4
Select "Search wireless network".
5
Select and input the details.
≥ Check your home wireless network name
(Network name (SSID)) and password for
this network. This can often be found on the
wireless router itself.
[1] Select your home wireless network
name.*
3
[2] Type the password.
[3] Select "NEXT".
6
Select "JOIN" to apply the settings.
{.
In the pop-up screen, select "OK" to continue.
– Select "CANCEL" to return to the setup window.
{.
The Wi-Fi
status indicator blinks blue.
®
– You can now close the Safari browser.
7
The unit's settings are completed when
the Wi-Fi
status indicator stops blinking
®
after about 2 minutes and lights blue.
If the Wi-Fi
status indicator turns off, turn the unit
®
off and on again, check the wireless network
password and other settings and start again from
step 1.
8
Make sure to connect your iPhone back to
your home wireless network.*
9
To use AirPlay, turn to page 9.
4
8)
above)
7
RQT9658

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents