Panasonic Diga DMR-PWT500 Operating Instructions Manual page 85

∫ Clock
If the time is not set correctly, use the settings listed in
the method below.
Clock
Automatic Time Zone
On
Time Date
0 00 10 1
Please set the clock.
OK : access RETURN : leave
OK
RETURN
≥Automatic
This unit usually obtains time and date information
from digital broadcasts.
But, if the time is not set correctly, set it to "Off" and
perform "Manual Setting".
≥Time Zone
When the time is not correct, set "Time Zone".
(GMT - 6 to + 6)
≥Manual Setting
1 Select "Off" of "Automatic", then press [OK].
2 Select the item you want to change.
3 Change the setting.
4 Press [OK] when you have finished the settings.
∫ Owner ID
In order to prevent another person from using this unit
if it is stolen, you can set a PIN and input your personal
information (NAME, HOUSE NO, POSTCODE).
Once the PIN has been set, you cannot return to
the factory preset. Make sure not to forget this.
∫ PIN Entry
You can set/change the PIN for parental control.
( 74)
Automatic
1 2011
∫ System Update
Others
System Update
System Update
Software Update in Standby
Software Update Now ( Broadcast )
Software Update Now ( Internet )
Software Licence
Post Code
GUIDE Plus+ System Information
Software Update in Standby
When you set this unit to standby mode, software
(firmware) updates (
automatically.
Software Update Now ( Broadcast )
Software of this unit will be updated from
broadcasts if update information is detected.
( 87)
Software Update Now ( Internet )
Software of this unit will be updated from Internet
if update information is detected. (
Software Licence
Information about the software licence is
displayed.
Post Code
Input the postal code which is necessary to
download area specific information of GUIDE
Plus+ system.
Guide Plus+ System Information
You can check the condition of GUIDE Plus+
system of this unit.
Enlgish
87) are downloaded
87)
VQT3C81
85