Cleaning And Care; Appliance Front And Control Panel - Miele H 4210 Operating Instructions Manual

Appliance front and control
panel
Clean the following regularly, preferably
after each use:
– the controls,
– the door handle,
– the trim inside door,
– the seal between the appliance door
and the cooking compartment
This will help to prevent grease and
other deposits adhering to the surfaces
and becoming difficult to remove and
also in some cases, causing
discolouration.
Grease deposits can also cause the
seal to become brittle and crack.
If you need to remove the function
selector, temperature selector or hob
zone controls for cleaning you must
disconnect the appliance from the
mains electricity supply first. Switch
off and unplug at the socket, or
remove the fuse, or switch off at the
isolator as appropriate.
^ All surfaces and controls should be
cleaned using a Miele E-Cloth or with
warm water and a little washing up
liquid applied with a soft sponge or
cloth.
^ Wipe the surfaces dry using a soft
cloth.

Cleaning and care

E-Cloth
^ A microfibre "E-Cloth" is available
from the Miele UK Spare Parts
Department, which is suitable for
cleaning surfaces such as stainless
steel, glass, plastic and chrome
without the use of chemicals. It can
be washed 300 times.
Do not use scouring agents, hard
sponges or brushes or sharp metal
tools to clean glass as these can
scratch the surface.
To prevent the risk of scratches and
damage to the surface structure of your
appliance pay particular attention to the
following cleaning instructions.
Glass fronted appliances
The appliance front and controls are
susceptible to scratches and abrasion.
Do not use:
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents,
– sharp metal tools,
– oven sprays.
39