Clock/Timer; Controls; Setting The Time Of Day; To Change The Sound Of The Buzzer - Miele H 4210 Operating Instructions Manual

Clock/Timer

Depending on model, your appliance
may be fitted with a clock timer.
The clock/timer can:
– display the time of day.
– be used as a minute minder,
– be used to switch the oven off
automatically at the end of a cooking
process.

Controls

l
k
l
The clock/timer is operated using
buttons Q, P and O together with the
display.
The Q button is used for selecting the
"Minute minder l" and "Cooking
duration l" functions.
To change the time of day shown in the
display press the P and O buttons at
the same time.
You can only enter a time for a
particular function if its symbol is shown
flashing in the display, e.g. "l", "l" or
"k".
The symbol will flash for about 7
seconds. If you fail to enter the time
during this 7 seconds you will have
to call the symbol up in the display
again.
Each press of the P or O button alters
the time in one minute increments.
Holding one of these buttons in will
speed up the process.
22
The time you set is automatically saved
to memory after about 7 seconds and
the symbol will stop flashing.
Pressing the Q button is another way of
saving your setting.

Setting the time of day

^ Press the P and O buttons at the
same time.
^ Whilst the "k" point is flashing in the
display, use the P or O buttons to
enter the time.
The clock has a 24 hour display.
The time then counts down in minutes
If there has been a power cut the time
of day has to be re-entered.
To change the sound of the
buzzer
There are 3 different tones.
^ Press the O button until the audible
tone is heard.
Each press of button O calls up a
different tone.
The last tone selected will automatically
be saved to memory after about 7
seconds.
If there has been a power cut the
audible tone will automatically revert to
the factory default setting, and will need
to be reset.