Using Sound Effects; Using Other Optional Equipments - Panasonic RX-D50 Operating Instructions Manual

Using sound effects

Changing the sound quality Changing the sound quality
Preset EQ
Press [PRESET EQ] (main unit: [SOUND EQ]) repeatedly
to select your desired setting.
EQ1 (HEAVY)
EQ2 (CLEAR)
EQ3 (SOFT)
EQ4 (VOCAL)
EQ OFF
BASS or TREBLE
Enables you to enjoy the lower or higher pitch sound.
1
Press [BASS] or [TREBLE] to select your desired
setting.
2
Press [2/3] or [5/6] to adjust the level.
✒
Note
• The level of the pitch is between -4 to +4.
• Select "EQ OFF" to cancel BASS or TREBLE.
RE-MASTER
This feature reproduces the frequencies lost during recording
(original soundtrack) to give you a sound closer to the original.
Press [RE-MASTER] repeatedly to select either "ON R.M"
or "OFF R.M".
Enhancing the stereo sound: Sound virtualizer Enhancing the stereo sound: Sound virtualizer
Enables you to add natural width and depth to the stereo
sound.
Press [SOUND VIRTUALIZER] to display "
button again to cancel.
✒
Note
• Recording is not affected by this feature.
• The actual effect depends on the source played.
10
Adds punch to rock
Clarifi es higher frequencies
For background music
Adds gloss to vocal
Cancels the EQ selection
". Press the

Using other optional equipments

Connecting to a portable audio equipment Connecting to a portable audio equipment
This feature enables you to enjoy music from a portable audio
equipment.
Audio cord
(not included)
Portable audio equipment
(not included)
Playing a portable audio equipment
Switch off the equalizer function (if there is any) of the portable
audio equipment before you plug into the MUSIC PORT jack.
Otherwise, sound from the speaker may be distorted.
1
Plug the audio cord into the MUSIC PORT jack.
2
Press [MUSIC PORT].
3
Play the portable audio equipment. (See the portable
audio equipment's instruction manual.)
Level adjustment
You can select the sound input level of your portable audio
equipment.
Press [INPUT LEVEL] to select your desired setting.
HI (high)
✒
Note
Select low if the sound is distorted when level high is activated.
LO (low)