Panasonic RX-D50EE Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Stereo System
  5. RX-D50EE
  6. Service manual
Panasonic RX-D50EE Service Manual

Panasonic RX-D50EE Service Manual

Portable stereo cd system
Hide thumbs Also See for RX-D50EE:
Table of Contents

Advertisement

Quick Links

Notes: Please refer to the original service manual for:
G CD Mechanism Unit (DLS6F), Order No. PSG1002024AE

TABLE OF CONTENTS

1 Safety Precautions----------------------------------------------- 3
1.1. General Guidelines---------------------------------------- 3
1.2. Before Repair and Adjustment ------------------------- 4
1.3. Caution For Fuse Replacement------------------------ 4
1.4. Protection Circuitry ---------------------------------------- 4
1.5. Safety Part Information----------------------------------- 4
2 Warning -------------------------------------------------------------- 5
2.2. Precaution of Laser Diode------------------------------- 6
Portable Stereo CD System
Model No.
Product Color : (S)...Silver Type
PAGE
3 Service Navigation --------------------------------------------- 10
3.1. Service Information -------------------------------------- 10
4 Specifications ---------------------------------------------------- 11
Operations ------------------------------------------------- 12
5.2. Disc Information ------------------------------------------ 13
6.1. Self Diagnostic Mode ----------------------------------- 14
6.2. Doctor Mode ---------------------------------------------- 15
7 Service Fixture & Tools --------------------------------------- 19
© Panasonic Corporation 2010. All rights reserved.
Unauthorized copying and distribution is a violation of
law.
RX-D50EE
PSG1004006CE
PAGE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RX-D50EE and is the answer not in the manual?

Questions and answers

Related Manuals for Panasonic RX-D50EE

Summary of Contents for Panasonic RX-D50EE

  • Page 1: Table Of Contents

    2.3. Service caution based on Legal restrictions -------- 7 7 Service Fixture & Tools --------------------------------------- 19 2.4. Handling Precaution for Traverse Unit --------------- 8 8 Disassembly and Assembly Instructions--------------- 20 © Panasonic Corporation 2010. All rights reserved. Unauthorized copying and distribution is a violation of law.
  • Page 2 8.1. Disassembly flow chart --------------------------------- 21 17.3. DECK, PANEL, VOLUME & STANDBY P.C.B.--- 76 8.2. Main Parts Location Diagram ------------------------- 22 17.4. POWER, BATTERY (1) & BATTERY (2) 8.3. Disassembly of Top Cabinet Assembly ------------- 23 P.C.B. ------------------------------------------------------- 77 8.4. Disassembly of Music Port ---------------------------- 24 18 Terminal Function of IC’s ------------------------------------ 79 8.5.

  • Page 3: Safety Precautions

    1 Safety Precautions 1.1. General Guidelines 1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit. 2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed.

  • Page 4: Before Repair And Adjustment

    1.2. Before Repair and Adjustment Caution : DO NOT SHORT-CIRCUIT DIRECTLY (with a screwdriver blade, for instance), as this may destroy solid state devices. After repairs are completed, restore power gradually using a variac, to avoid overcurrent. • Current consumption at AC 230V, 50Hz in TUNER mode at volume (min) should be (~300 mA). 1.3.

  • Page 5: Warning

    2 Warning 2.1. Prevention of Electro Static Discharge (ESD) to Electrostatically Sensi- tive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor “chip”...

  • Page 6: Precaution Of Laser Diode

    2.2. Precaution of Laser Diode CAUTION! THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. Caution: This product utilizes a laser diode with the unit turned "on", invisible laser radiation is emitted from the pickup lens. Wavelength: 795 nm (CD) Maximum output radiation power from pickup: 100 μW/VDE Laser radiation from the pickup unit is safety level, but be sure the followings:...

  • Page 7: Service Caution Based On Legal Restrictions

    2.3. Service caution based on Legal restrictions 2.3.1. General description about Lead Free Solder (PbF) The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this equipment in considering the globally environmental conservation. The normal solder is the alloy of tin (Sn) and lead (Pb).

  • Page 8: Handling Precaution For Traverse Unit

    2.4. Handling Precaution for Traverse Unit The laser diode in the optical pickup unit may break down due to static electricity of clothes or human body. Special care must be taken avoid caution to electrostatic breakdown when servicing and handling the laser diode in the traverse unit. Cautions to Be Taken in Handling the Optical Pickup Unit 2.4.1.
  • Page 9 2.4.2.2. Human body grounding 1. Use the anti-static wrist strap to discharge the static electricity form your body (Figure 2). Figure 2...

  • Page 10: Service Navigation

    3 Service Navigation 3.1. Service Information This service manual contains technical information which will allow service personnel’s to understand and service this model. Please place orders using the parts list and not the drawing reference numbers. If the circuit is changed or modified, this information will be followed by supplement service manual to be filed with original service manual.

  • Page 11: Specifications

    4 Specifications Mass 3.3 kg without batteries (3.9 kg with batteries) Operating temperature range 0°C to +40°C Operating humidity range 35% to 80 % RH (no condensation) Power consumption in standby mode: 0.8 W (approximate) I Amplifier Section Notes : RMS output power stereo mode 1.

  • Page 12: Location Of Controls And Components

    5 Location of Controls and Components 5.1. Main Unit and Remote Control Key Button Operations...

  • Page 13: Disc Information

    5.2. Disc Information...

  • Page 14: Self Diagnostic And Doctor Mode Setting

    6 Self Diagnostic and Doctor Mode Setting This unit is equiped with features of self diagnostic & doctor mode setting for checking the functions & reliability. 6.1. Self Diagnostic Mode 6.1.1. Self Diagnostic Table Item FL display Key operation Mode name Description Self Diagnostic Mode To enter into self diagnostic...

  • Page 15: Doctor Mode

    6.2. Doctor Mode 6.2.1. Doctor Mode Table 1 Item FL display Key operation Mode name Description Doctor Mode (Display 1) In any mode: To enter into Doctor Mode for checking of various items and 1. Press and hold [ ] on main displaying EEPROM and firmware unit follow by [4] and [7] on remote control.

  • Page 16: Doctor Mode Table

    6.2.2. Doctor Mode Table 2 Item FL display Key operation Mode name Description FL Display Test To check the FL segments display In Doctor Mode: (All segments will light up) 1. Press [AUTO OFF] on remote control. To cancel, press [0] on remote control.
  • Page 17 6.2.3. CD Loading Test Mode OPEN Operation OPEN wait for 1 s CLOSE Count Up Operation CLOSE wait for 4s 6.2.4. CD Traverse Unit Test First Track Access First Track Play 5 s Last Track Access Last Track Count Up Play 5 s...
  • Page 18 6.2.5. CD Combination Test Mode First Track Access First Track Play 10 s Last Track Access Count Up Last Track Play 10 s OPEN Operation OPEN wait for 1 s CLOSE Operation...

  • Page 19: Service Fixture & Tools

    7 Service Fixture & Tools Prepare service tools before proccess service position. Service Tools Remarks Deck P.C.B. (JW830) - Main P.C.B. (CN2104) REXN0084 (10P cable) Panel P.C.B. (ZJ903) - Main P.C.B. (CN4104) REXN0082 (4P cable) Panel P.C.B. (CN900) - Main P.C.B. (CN2105) REXN0080 (10P cable)

  • Page 20: Disassembly And Assembly Instructions

    8 Disassembly and Assembly Instructions Caution Note: • This section describes the disassembly and/or assembly procedures for all major printed circuit boards & main compo- nents for the unit. (You may refer to the section of “Main components and P.C.B Locations” as described in the service manual) •...

  • Page 21: Disassembly Flow Chart

    8.1. Disassembly flow chart The following chart is the procedure for disassembling the casing and inside parts for internal inspection when carrying out the ser- vicing. To assemble the unit, reverse the steps shown in the chart below.

  • Page 22: Main Parts Location Diagram

    8.2. Main Parts Location Diagram...

  • Page 23: Disassembly Of Top Cabinet Assembly

    8.3. Disassembly of Top Cabinet Step 3 : Remove 12 screws. Step 4 : Upset the unit. Assembly Step 1 : Upset the unit. Step 2 : Release 2 catches to remove Battery Cover. Step 5 : Slightly lift up the Top Cabinet Assembly as arrow shown.

  • Page 24: Disassembly Of Music Port

    8.4. Disassembly of Music Port 8.5. Disassembly of Front Panel Assembly • Refer to “Disassembly of Top Cabinet Assembly”. • Refer to “Disassembly of Top Cabinet Assembly”. Step 1 : Remove 2 screws. Step 2 : Lift up the Standby P.C.B.. Step 1 : Upset the unit.

  • Page 25: Disassembly Of Panel P.c.b., Standby P.c.b. And Volume P.c.b

    Step 6 : Remove Front Panel Assembly as arrow shown. 8.6. Disassembly of Panel P.C.B., Standby P.C.B. and Volume P.C.B. • Refer to “Disassembly of Top Cabinet Assembly”. • Refer to “Disassembly of Front Panel Assembly”. Step 1 : Remove 4 screws. Step 2 : Lift up the Volume P.C.B.

  • Page 26: Disassembly Of Woofer Speaker (Sp1)

    Step 4 : Desolder 2P wire at (ZJ901) on the Panel P.C.B.. 8.7. Disassembly Woofer Step 5 : Desolder 2P wire at (ZJ902) on the Panel P.C.B.. Speaker (SP1) • Refer to “Disassembly of Top Cabinet Assembly”. • Refer to “Disassembly of Front Panel Assembly”. Step 1 : Desolder 2P wire on Woofer Speaker (SP1).

  • Page 27: Disassembly Of Woofer Speaker (Sp2)

    8.8. Disassembly Woofer 8.9. Disassembly of CD Lid Speaker (SP2) • Refer to “Disassembly of Top Cabinet Assembly”. • Refer to “Disassembly of Front Panel Assembly”. • Refer to “Disassembly of Top Cabinet Assembly”. • Refer to “Disassembly of Front Panel Assembly”. Step 1 : Remove the Spring as arrow shown in order of sequences (1) to (3).

  • Page 28: Disassembly Of Deck Mechanism Unit

    Step 3 : Remove the CD Lid. 8.10. Disassembly of Deck Mecha- nism Unit • Refer to “Disassembly of Top Cabinet Assembly”. Step 1 : Remove 3 screws. Step 2 : Open Mecha Bottom Cover as arrow shown. Step 3 : Press the STOP/EJECT button to open Cassette Lid.
  • Page 29 Caution : During assembling, ensure the Deck Mechanism Unit is properly fitted into the Locator. Step 4 : Remove the Deck Mechanism Unit as arrow shown. Caution : During assembling, ensure the Deck Mechanism Unit is properly sitted under the Catch.

  • Page 30: Disassembly Of Deck P.c.b

    8.11. Disassembly of Deck P.C.B. 8.12. Disassembly of Cassette Lid • Refer to “Disassembly of Top Cabinet Assembly”. • Refer to “Disassembly of Top Cabinet Assembly”. • Refer to “Disassembly of Deck Mechanism Unit”. Step 1 : Remove 2 screws. Step 2 : Desolder 2P wire at (JW501) on the Deck P.C.B..
  • Page 31 Step 3 : Lift up the Spring as arrow shown. Step 6 : Remove Cassette Lid as arrow shown. Step 4 : Remove the Spring. Step 5 : Push the shafts of Cassette Lid inward as arrow shown.

  • Page 32: Disassembly Of Mecha Bottom Cover

    8.13. Disassembly of Mecha Bottom Step 4 : Open the Mecha Bottom Cover as arrow shown. Cover • Refer to “Disassembly of Top Cabinet Assembly”. Step 1 : Remove 3 screws. Step 2 : Remove the Top Cover. Step 5 : Using flat screwdriver slightly push the shaft (A) of Mecha Bottom Cover in order of sequence (1) to (2) as arrow shown.

  • Page 33: Disassembly Of Power P.c.b

    Step 6 : Using flat screwdriver slightly push the shaft (B) of 8.14. Disassembly of Power P.C.B. Mecha Bottom Cover in order of sequence (3) to (4) as arrow • Refer to “Disassembly of Top Cabinet Assembly”. shown. Step 1 : Remove 1 screw. Step 2 : Lift and remove the PCB Support as arrow shown.
  • Page 34 Step 3 : Remove 4 screws. Step 5 : Remove the cables from the slot. Step 4 : Detach 8P cable at the connector (CN4100) on Main Caution : During assembling, ensure the cables as prop- erly inserted into the Slot. P.C.B..

  • Page 35: Disassembly Of Main P.c.b

    Step 7 : Release 6 catches. 8.15. Disassembly of Main P.C.B. Step 8 : Remove the Safety cover. • Refer to “Disassembly of Top Cabinet Assembly”. Step 1 : Detach 4P cable at the connector (CN4104) on Main P.C.B.. Step 2 : Detach 10P cable at the connector (CN2105) on Main P.C.B..

  • Page 36: Replacement Of Transisor (Q4107)

    Step 7 : Lift up to remove Main P.C.B.. 8.16. Replacement Transisor (Q4107) • Refer to “Disassembly of Main P.C.B.” 8.16.1. Disassembly of Transistor (Q4107) Step 1 : Desolder pins of the Transistor (Q4107) on the solder side of Main P.C.B.. Caution 1 : During assembling, ensure the Main P.C.B.
  • Page 37 Step 3 : Remove the Transistor (Q4107). Step 3 : Fix 1 screw on the Transistor (Q4107) onto the Heat- Caution : Avoid touching the Heatsink Unit due to its high sink Unit. temperature after prolonged use. Touching it may lead to injuries.

  • Page 38: Replacement Of Power Ic (Ic4101)

    8.17. Replacement Power Step 4 : Desolder pins of the Power IC (IC4101) on the solder side of the Main P.C.B.. (IC4101) • Refer to “Disassembly of Main P.C.B.” 8.17.1. Disassembly of Power IC (IC4101) Step 1 : Desolder pins of the Heatsink Unit. Step 5 : Remove the Power IC (IC4101).
  • Page 39 8.17.2. Assembly of Power IC (IC4101) Step 3 : Apply Grease to the Heatsink Unit. Step 1 : Install the Power (IC4101) on Main P.C.B.. Caution : Ensure the pins are inserted and seated properly on Main P.C.B.. Step 4 : Install the Heatsink Unit on Main P.C.B. Caution : Ensure the pins are inserted and seated properly on Main P.C.B..

  • Page 40: Disassembly Of Cd Mechanism Unit

    8.18. Disassembly of CD Mecha- 8.19. Disassembly Servo nism Unit P.C.B. • Refer to “Disassembly of Top Cabinet Assembly”. • Refer to “Disassembly of CD Mechanism Unit” • Refer to “Disassembly of Main P.C.B.” Step 1 : Remove 3 screws. Step 1 : Remove 2 screws.

  • Page 41: Disassembly Of Battery (1) P.c.b

    8.20. Disassembly Battery Step 2 : Remove the Battery (1) P.C.B. as arrow shown. P.C.B. • Refer to “Disassembly of Top Cabinet Assembly”. • Refer to “Disassembly of Main P.C.B.” Step 1 : Release the catch. Step 3 : Desolder 4P cable at (CN921) on the Battery (1) P.C.B.

  • Page 42: Disassembly Of Battery (2) P.c.b

    8.21. Disassembly Battery P.C.B. • Refer to “Disassembly of Top Cabinet Assembly”. • Refer to “Disassembly of Main P.C.B.” Step 1 : Release the catch. Step 2 : Remove the Battery (2) P.C.B. as arrow shown.

  • Page 43: Disassembly And Assembly Of Traverse Unit

    9 Disassembly and Assembly of Traverse Unit 9.1. Disassembling Procedures Step 3 : Slide out the traverse unit as arrow shown. Step 1 : Release the guide. Step 2 : Push the traverse slide plate (rib), ensure both grooves are opened. Caution : Ensure the OPU is face upwards, avoid touching the surface of the traverse unit.

  • Page 44: Assembling Procedure

    9.2. Assembling Procedure Step 1 : Release the guide. Step 2 : Push the traverse slide plate (rib), ensure both grooves Caution : Removal of the short pin is necessary for are opened. replacement of new traverse unit. Step 3 : Slot the traverse unit at approximately 45° into the mecha chassis as arrow shown.
  • Page 45 Caution : Ensure the bosses fix exactly onto the guides. Step 4 : Release the guide. Step 5 : Push the traverse slide plate (rib) to lock the traverse unit in.

  • Page 46: Service Position

    10 Service Position Note: For description of the disassembly procedures, see the Section 8 Note: Insert CD before checking 10.1. Checking & Repairing Deck 10.2. Checking & Repairing Panel P.C.B. P.C.B. Step 1 : Remove the Top Cabinet Assembly. Step 1 : Remove the Top Cabinet Assembly. Step 2 : Attach original cable with extension cable REXN0084 Step 2 : Attach original cable with extension cable REXN0084 (10P cable from JW830 on Deck P.C.B.

  • Page 47: Checking & Repairing Power P.c.b

    10.3. Checking & Repairing Power 10.4. Checking & Repairing Main P.C.B. P.C.B. Step 1 : Remove the Top Cabinet Assembly. Step 1 : Remove the Top Cabinet Assembly. Step 2 : Remove the Power P.C.B.. Step 2 : Remove the Main P.C.B.. Step 3 : Attach original cable with extension cable REXN0084 Step 3 : Connect 22P FFC at the connector (CN2101) on the (10P cable from JW830 on Deck P.C.B.
  • Page 48 Step 5 : Attach original cable with extension cable REXN0084 Step 8 : Place the insulating material as shown in the diagram. (10P cable from JW830 on Deck P.C.B. to CN2104 on Main Step 9 : Upset the Main P.C.B. onto the insulating material. P.C.B.).

  • Page 49: Checking & Repairing Cd Servo P.c.b

    10.5. Checking & Repairing Step 8 : Place the insulating material as shown in the diagram. Step 9 : Connect 22P FFC at the connector (CN2101) on the Servo P.C.B. Main P.C.B.. Step 1 : Remove the Top Cabinet Assembly. Step 10 : Check and repair the CD Servo P.C.B.

  • Page 50: Measurements And Adjustments

    11 Measurements and Adjustments 11.1. Tuner Section READ CAREFULLY BEFORE ATTEMPTING ALIGNMENT 1. Set selector switch to AM, FM and TAPE. 2. Set volume level to maximum. 3. Output of signal. G AM-RF ALIGNMENT Signal Generator or Sweep Generator Radio Dial Setting Indicator (Electronic Voltmeter Adjustment Remarks...

  • Page 52: Deck Mechanism Section

    11.2. Deck Mechanism Section G HEAD AZIMUTH ALIGNMENT TEST TAPE INDICATOR (ELECTRONIC VOLTMETER ADJUSTMENT REMARKS or OSCILLOSCOPE) QZZCAB Headphone Jack (32Ω ) Azimuth Screw 1. Insert the test tape (QZZCAB) and start playback at (~ 3 dB) Fabricate the plug as shown in Fig.3 and (Shown in Fig.4) maximum volume &...

  • Page 53: Voltage Measurement & Waveform Chart

    STANDBY IC7001 REF NO. MODE CD PLAY STANDBY REF NO. IC7001 MODE CD PLAY STANDBY IC7002 REF NO. MODE CD PLAY STANDBY IC7002 REF NO. MODE CD PLAY STANDBY Q7601 REF NO. MODE CD PLAY STANDBY RX-D50EE CD SERVO P.C.B.

  • Page 54: Main P.c.b. (1/2)

    CD PLAY STANDBY REF NO. IC2100 MODE CD PLAY STANDBY IC2100 REF NO. MODE CD PLAY STANDBY REF NO. IC2101 MODE CD PLAY STANDBY IC2500 REF NO. MODE CD PLAY STANDBY REF NO. IC2500 MODE CD PLAY STANDBY RX-D50EE MAIN P.C.B.

  • Page 55: Main P.c.b. (2/2)

    STANDBY 14.9 15.3 14.6 15.8 14.8 15.6 Q4117 Q4118 Q4119 QR4104 QR4105 REF NO. MODE DECK PLAY 15.7 15.7 STANDBY 15.7 15.7 RX-D50EE MAIN P.C.B. 12.4. DECK P.C.B. Q133 Q233 Q321 REF NO. MODE CD PLAY STANDBY RX-D50EE DECK P.C.B.

  • Page 56: Panel P.c.b

    MODE CD PLAY STANDBY IC900 REF NO. MODE CD PLAY STANDBY Q900 REF NO. MODE CD PLAY STANDBY RX-D50EE PANEL P.C.B. 12.6. POWER P.C.B. IC5901 REF NO. MODE CD PLAY 12.0 12.0 STANDBY 12.0 12.0 Q5904 Q5905 Q5906 REF NO.

  • Page 57: Waveform Chart

    12.7. Waveform Chart 0.11Vp-p(50nsec/div) 0.6Vp-p(50usec/div) 0.56Vp-p(5usec/div) 0.68Vp-p(5usec/div) 0.1Vp-p(50usec/div) 4Vp-p(50nsec/div) 2Vp-p(20nsec/div) 1.4Vp-p(5usec/div) 2.2Vp-p(5usec/div) 3.2Vp-p(200usec/div) 0.04Vp-p(100usec/div) 0.36Vp-p(200usec/div) 0.1Vp-p(200usec/div) 2.8Vp-p(50usec/div) 0.1Vp-p(200usec/div) 1.8Vp-p(5usec/div) 0.52Vp-p(1usec/div) 2.4Vp-p(100nsec/div) 4.8Vp-p(20nsec/div) 1.9Vp-p(20nsec/div)

  • Page 58: Illustration Of Ic's, Transistors And Diodes

    13 Illustration of IC’s, Transistors and Diodes C0DAEJG00001 C0EBM0000024 BA5948FPE2 (28P) C1BB00001120 (36P) C0CBABE00023 C0CBABE00040 C1BB00000732 (32P) B1ADCF000001 MN6627954AMA (100P) C0EBE0000124 C1BA00000421 BA3313L C0HBA0000268 (44P) RFKWMD45EG-W (100P) B1ABCF000176 B0ADFJ000004 B1BCCG000002 B1ACCF000094 B1HBECA00004 B1ADCE000012 B1GBCFJN0033 B1ABDF000026 B1GDCFNN0007 MAZ8056GML B0EAKM000117 B3ACA0000264 B0ACCK000005 B0CDAB000019 B0JACE000003 B0BC9R1A0218...

  • Page 59: Wiring Connection Diagram

    14 Wiring Connection Diagram 6V (4 x R6/LR6, AA) 12V (8 x LR14, C) OPTICAL PICKUP...

  • Page 61: Schematic Diagram Notes

    15 Schematic Diagram Notes (All schematic diagrams may be modified at any time with • Voltage and signal line the development of new technology) : +B Signal Line Notes: S501: LEAF switch S502: CUE/REV switch : CD/TAPE Audio input Signal Line S900: STDBY switch S901:...

  • Page 63: Schematic Diagram

    C7243 DVDD1 C7155 IODD2 R7329 SDRCK DVSS1 X7201 H0H169500013 R7328 21 20 15 14 12 11 C7335 C7334 10V220 R7323 R7331 6.8K IC7002 BA5948FPE2 R7325 R7315 DRIVER 3.3K R7332 R7335 RX-D50EE CD SERVO CIRCUIT M7301* M7302* TRAVERSE MOTOR SPINDLE MOTOR...

  • Page 64: Main Circuit (1/6)

    C4140 R4132 0.068 R4136 3.9K AGND 6.8K R4129 FILTER C4142 R4134 2.2K R2507 C2510 C4138 TUNER_RCH 2700P R4127 CD_LCH R2516 100K R4124 C2514 R2520 C2516 220P C2517 R2521 220P CD_RCH R2517 100K C2518 TO MAIN SECTION (4/6) RX-D50EE MAIN CIRCUIT...

  • Page 65: Main Circuit (2/6)

    16V1000 C4145 C4164 16V100 470P TO MAIN TO MAIN CN4104 SECTION (3/6) SECTION (1/6) PANEL CIRCUIT (ZJ903*) IN SCHEMATIC DIAGRAM - 9 C4179 C4165 0.01 470P FP4100 C4154 C4152 25V3300 TUNER_GND DGND M+9VGND TO MAIN SECTION (5/6) RX-D50EE MAIN CIRCUIT...

  • Page 66: Main Circuit (3/6)

    KEY1 KEY1 KEY2 KEY2 R5936 LCD_DI LCD_DI LCD_CE PANEL CIRCUIT LCD_CE (ZJ900*) R5937 4.7K LCD_CLK LCD_CLK IN SCHEMATIC BU3.3V DIAGRAM - 9 3.3V RM_IN RMT_P RMT_ON RMT_ON Q2103 B1GDCFNN0007 LCD_ON R2538 POWER SUPPLY TO MAIN SECTION (6/6) RX-D50EE MAIN CIRCUIT...

  • Page 67: Main Circuit (4/6)

    50V4.7 RLQY30S1W H0A750200020 4.7K 3.3V L200 B0CDAD000010 J0JKB0000020 C1BB00001120 TUNER 1000P C294 RLQY30S1W AGND 6.3V220 TUNER_GND G2CAEB000003 1000P 100K PLL_DO PLL_CLK PLL_DI 0.047 PLL_CE J0B1075A0129 CT51 0.033 RCVTZ11F 330P 0.047 TUNER_RCH 50V1 6.3V100 TUNER_LCH 50V1 J0B4503A0074 G2BAC0000051 RX-D50EE MAIN CIRCUIT...
  • Page 68 25V220 C4148 C4153 C4162 R4152 C4149 16V100 16V47 IC4100 STBY3.3V D4106 B0ACCK000005 C0CBABE00040 VOUT GND VOLTAGE REGULATOR BU3.3V D4103 B0ACCK000005 VREF+ D4104 B0ACCK000005 Q4105 R5925 100K B1ADCE000012 POWER SUPPLY R4141 2.2K R4139 QR4104 B1GBCFJN0033 POWER CONTROL PGND RX-D50EE MAIN CIRCUIT...

  • Page 69: Main Circuit (5/6)

    100K C2113 220P STBY3.3V R2140 R2175 470K CN2102 IC2101 MMOD C0EBE0000124 MICONRST C4167 6.3V100 QR4105 RESET OCD_SCL FOR SOFTWARE WRITING B1GBCFJN0033 DC DETECT OCD_SDA R5903 R5908 C2126 330K STBY3.3V DGND VREF+ Q2102 Q2101 B1ABDF000026 B1ABDF000026 INVERTER INVERTER RX-D50EE MAIN CIRCUIT...

  • Page 70: Deck Circuit

    25V100 R319 R208 PRE AMPLIFIER S502 CUE/REV R205 C210 SWITCH 16V100 C208 R202 R206 2200P 2.2K 2.7K R321 T320 R323 C321 RL0N9B17-T 1000P Q321 B1ABCF000176 C324 BIAS SWITCH 1500P R325 C322 C327 0.022 0.01 R324 C323 16V100 RX-D50EE DECK CIRCUIT...

  • Page 71: Panel, Volume & Standby Circuit

    R916 R915 R914 ZJ908* ZJ909* 4.7K 3.3K 2.2K 1.5K 1.2K R992 KEY2 KEY2 C956 S900 3300P STDBY R993 S901 S910 S911 S912 S902 C955 MUSIC PORT OPEN/CLOSE STOP FM/AM 3300P PLAY/PAUSE D993 B3ACA0000264 RX-D50EE PANEL / VOLUME / STANDBY CIRCUIT...

  • Page 72: Power Circuit

    INVERTER D5925 230V B0ACCK000005 BATTERY (1) R5902 CIRCUIT (CN921*) 117V IN SCHEMATIC DIAGRAM - 11 FUSE D5910 R5919 B0ACCK000005 T5903 G4C4BAH00002 MAIN TRANSFORMER L5901 ELF15N035AN F5902 Z5902 T1.6AL 250V ERZVA5Z471 JK5901 AC INLET ZA5903 ZA5904 230V 50Hz RX-D50EE POWER CIRCUIT...

  • Page 73: Battery (1), Battery (2) & Music Port Circuit

    : MUSIC PORT AUDIO INPUT SIGNAL LINE JK950 MUSIC PORT R907 L951 J0JBC0000019 CN904* C950 MAIN CIRCUIT L950 1000P MPORT_LCH J0JBC0000019 (CN4105) AGND IN SCHEMATIC MPORT_RCH C953 DIAGRAM - 4 L952 1000P J0JBC0000019 R903 RX-D50EE BATTERY (1) / BATTERY (2) / MUSIC PORT CIRCUIT...

  • Page 74: Printed Circuit Board

    Q7601 S7201 C7315 (REST SW) TP31 R7327 C7339 R7329 TP37 TP10 TP90 TP11 IC7002 C7335 M7302* (SPL MOTOR) C7334 TP36 S7202 (CD OPEN SW) NOTE: " * " REF IS FOR INDICATION ONLY. RX-D50EE CD SERVO / MUSIC PORT P.C.B.

  • Page 75: Main P.c.b

    W2015 W1076 W1016 W2014 R2103 IC2101 R2177 R2105 W2027 W1077 R2104 W1078 R2107 W1082 W1083 C2121 R5931 W2018 CN4105 L2101 L4102 L4103 C4164 CN4104 L4101 CN2105 Q2103 C4179 RX-D50EE NOTE: " * " REF IS FOR INDICATION ONLY. MAIN P.C.B.

  • Page 76: Deck, Panel, Volume & Standby P.c.b

    W520 Q233 SENSOR VOLUME P.C.B. (REPNT0062B) STANDBY P.C.B. (REPNT0062B) CN906* S900 ZJ908* (STANDBY) S907 C956 (VOL-) S908 0659AB 0659AB 0659AC 0659AC (VOL+) NOTE: " * " REF IS FOR INDICATION ONLY. RX-D50EE DECK / PANEL / VOLUME / STANDBY P.C.B.

  • Page 77: Power, Battery (1) & Battery

    0658BC JW4101* JW920* CAUTION SP5903 RISK OF ELECTRIC SHOCK AC VOLTAGE LINE. PLEASE DO NOT TOUCH THIS P.C.B BATTERY (2) P.C.B. (REPNT0063E) NOTE: " * " REF IS FOR INDICATION ONLY. RX-D50EE POWER / BATTERY (1) / BATTERY (2) P.C.B.

  • Page 79: Terminal Function Of Ic's

    18 Terminal Function of IC’s 18.1. IC7001 (MN6627954AMA) IC SERVO PROCESSOR Pin No. Mark Function OUTL Audio O/P (LCH) Pin No. Mark Function AVSS1 DRAM address signal O/P 9 AVDD1 Analog Power Supply Voltage 1 DRAM address signal O/P 11 OUTR Audio O/P (RCH) DRAM address signal O/P 8...

  • Page 80: Ic7002 (Ba5948Fpe2) Ic 4Ch Drive

    18.2. IC7002 (BA5948FPE2) IC 4CH Drive Pin No. Mark Function N.C. Not in Use Pin No. Mark Function RMT_IN Remote Control Input Motor Driver Input HALT AC Detection Turntable Motor Drive Signal DCDET2 Power Failure Detection (F76) (L:ON) DC_DET DC Supply Detection Motor Drive (1) Input BLKCK CD Sub-code Block Clock Input...
  • Page 81 Pin No. Mark Function RMT_ON Remote Control Supply (Active "L") => Output "L" when HALT is present or => Output "L" when DC_DET=L and PCONT1=H N.C. No Connection N.C. No Connection N.C. No Connection N.C. No Connection N.C. No Connection Micom VDD 3.3V MUTE_A Amplifier MUTE Output (H:MUTE...

  • Page 83: Exploded View And Replacement Parts List

    *JW501 CP303 9 (TO MOTOR) (DECK P.C.B.) (MUSIC PORT P.C.B.) JK950 *CN904 (STANDBY P.C.B.) *ZJ909 (VOLUME P.C.B.) *ZJ908 *CN907 IR901 *CN906 *ZJ900 *ZJ902 (PANEL P.C.B.) *ZJ903 *ZJ901 Z902 RX-D50EE-S NOTE: " * " REF IS FOR INDICATION ONLY. CABINET DRAWINGS...
  • Page 84 UNIT (DLS6F) SP5903 *CN921 SP5902 (CD SERVO P.C.B.) (BATTERY (1) P.C.B.) S7201 CN7001 *SP5901 CN7002 (SUPPORT P.C.B.) S7202 26-2 26-2 26-2 26-1 26-3 26-2 RX-D50EE-S CABINET DRAWINGS NOTE: " * " PART IS NOT SUPPLIED / REF IS FOR INDICATION ONLY.
  • Page 85 19.1.2. Deck Mechanism Parts Location (RAA0948-N) TAPE SIDE (TOP) GEAR SIDE (BOTTOM) (MECH ASSEMBLY) (MECH ASSEMBLY) RX-D50EE-S DECK MECHANISM DRAWINGS...
  • Page 86 19.1.3. Packaging A1-1 F R O N POLYFOAM (LEFT) POLYFOAM (RIGHT) RX-D50EE-S PACKAGING DRAWINGS...
  • Page 87 19.1.4. Mechanical Repacement Parts List Safety Ref. Part No. Part Name & Remarks Description Safety Ref. Part No. Part Name & Remarks SUX102A MECHA BUTTON HOLDER 1 Description XEARR210CA-C ROD ANTENNA CABINET AND CHASSIS RFKGXD50EG-S FRONT CABINET ASS'Y 1 RYQN0009B-S BOTTOM CABINET RASN8P050-G...
  • Page 88 Safety Ref. Part No. Part Name & Remarks Description XTW3+10FFJ SCREW REXN0083 CABLE WIRE (MUSIC PORT-MAIN) RMCN0005-1 R/P SPRING XTV3+8FFJ SCREW RMR0368-1 MECHA CHASSIS RMVN0063-W LED COVER REU01R094A 1P WIRE (W3A-W3B) RWJ0201100KK 1P WIRE (W1A-W1B) RWJ0201100KK 1P WIRE (W2A-W2B) CASSETTE DECK RDV0021-1 CAPSTAN BELT RXK0215-J1...

  • Page 89: Electrical Replacement Parts List

    19.2. Electrical Replacement Parts List Safety Ref. Part No. Part Name & QTY Remarks Description Safety Ref. Part No. Part Name & QTY Remarks Q900 B1ADCE000012 TRANSISTOR Description Q2101 B1ABDF000026 TRANSISTOR PRINTED CIRCUIT Q2102 B1ABDF000026 TRANSISTOR BOARDS Q2103 B1GDCFNN0007 TRANSISTOR Q4102 B1HBECA00004 TRANSISTOR PCB1...
  • Page 90 Safety Ref. Part No. Part Name & QTY Remarks Safety Ref. Part No. Part Name & QTY Remarks Description Description D4106 B0ACCK000005 DIODE L5901 ELF15N035AN LINE FILTER D4107 B0ACCK000005 DIODE G2BAC0000051 IFT D4108 B0ACCK000005 DIODE T320 RL0N9B17-T BIAS OSC COIL D5910 B0ACCK000005 DIODE D5919...
  • Page 91 Safety Ref. Part No. Part Name & QTY Remarks Safety Ref. Part No. Part Name & QTY Remarks Description Description W1058 ERJ3GEY0R00V 0 1/10W R907 ERJ3GEYJ102V 1K 1/10W W2000 ERJ3GEY0R00V 0 1/10W R909 ERJ3GEYJ222V 2.2K 1/10W W2001 ERJ3GEY0R00V 0 1/10W R910 ERJ3GEYJ332V 3.3K 1/10W...
  • Page 92 Safety Ref. Part No. Part Name & QTY Remarks Safety Ref. Part No. Part Name & QTY Remarks Description Description R2172 ERJ3GEYJ332V 3.3K 1/10W R5908 ERJ3GEY0R00V 0 1/10W R2174 ERJ3GEYJ563V 56K 1/10W R5910 ERJ3GEYJ473V 47K 1/10W R2175 ERJ3GEYJ474V 470K 1/10W R5913 ERJ3GEYJ222V 2.2K 1/10W...
  • Page 93 Safety Ref. Part No. Part Name & QTY Remarks Safety Ref. Part No. Part Name & QTY Remarks Description Description F1H1C473A041 0.047uF 16V C957 F1H1H332A219 3300pF F1H1H150A004 15pF C958 F1J1E105A008 1uF F2A1H3R3A213 3.3uF C910 F1J1E105A008 1uF F1H1E103A029 0.01uF C2101 F1H1H102A219 1000pF F2A1H1R0A213 1.0uF C2102 F1H1H102A219 1000pF...
  • Page 94 Safety Ref. Part No. Part Name & QTY Remarks Safety Ref. Part No. Part Name & QTY Remarks Description Description C4137 F1H1H272A219 2700pF C7253 F1H1H471A792 470pF C4138 F1H1H272A219 2700pF C7263 F1H1C104A041 0.1uF C4139 F1H1C683A071 0.068uF C7264 F1H1C104A041 0.1uF C4140 F1H1C683A071 0.068uF C7315 F1H1A4740010 0.47uF C4141...

This manual is also suitable for:

Rx-d50

Table of Contents