Position Of The Noise Plates On Machines With Cab - Komatsu PC27R-8 Operation & Maintenance Manual

SAFETY, NOISE AND VIBRATION PLATES
2.1.3 POSITION OF THE NOISE PLATES
ON MACHINES WITH CAB
The noise plates must always be legible and in good condi-
tions; for this reason, if they are dirty with dust, oil or grease, it
is necessary to clean them with a solution made of water and
detergent.
Do not use fuel, petrol or solvents.
If the plates are damaged, ask for new ones to Komatsu Utility
or to your Komatsu Utility Dealer.
In case of replacement of a component provided with a noise
plate, make sure that this plate is applied also on the new
piece.
NOISE OUTSIDE THE CAB
This value indicates the noise level outside the machine and
refers to the noise perceived by persons in the vicinity of the
work area.
NOISE INSIDE THE CAB
This value indicates the maximum noise level perceived by the
operator's ears inside the cab when this is completely closed.
26
L
WA
( 89/514/CE - 95/27/CE )
L
A
p
( 89/514/CE - 95/27/CE )
RYA11900
RYA11910
RYA11920