Maintenance Every 100 Hours Of Operation; Maintenance Every 250 Hours Of Operation - Komatsu PC27R-8 Operation & Maintenance Manual

MAINTENANCE PLAN

4.7.5 MAINTENANCE EVERY 100 HOURS OF OPERATION

N.
a Joint and ball-bearing ring articulations
4.7.6 MAINTENANCE AFTER THE FIRST 250 HOURS OF OPERATION
(Operations to be carried out together with those prescribed at point "4.7.7

MAINTENANCE EVERY 250 HOURS OF OPERATION")

N.
a Travel reduction gears
b Engine valves
4.7.7 MAINTENANCE EVERY 250 HOURS OF OPERATION
N.
a Fan belt
b Battery
c Travel reduction gears
d Hydraulic oil drainage filter
e Engine oil
4.7.8 MAINTENANCE AFTER THE FIRST 500 HOURS OF OPERATION
(Only for machines in which the synthetic biodegradable oil type
HEES is used)
(Carry out these operations together with those to be performed every 500
HOURS, see "4.7.9 MAINTENANCE EVERY 500 HOURS OF OPERATION")
N.
a Hydraulic oil and suction filter
(Only for machines with synthetic biodegrad-
able oil)
4.7.9 MAINTENANCE EVERY 500 HOURS OF OPERATION
N.
a Engine oil filter
b Fuel filter
c Fuel pump precleaner
d Radiators
e Hydraulic oil tank
(Only for machines with synthetic biodegrad-
able oil)
134
PART
PART
PART
PART
PART
OPERATION
Lubricate
OPERATION
Change the oil
Check the clearance
OPERATION
Check the fan belt condition and its tension
Check the electrolyte level
Check the levels (n. 2)
Change
Change
OPERATION
Change oil and clean filter
OPERATION
Change
Change
Change
Clean the outside
Drain condensate
PAGE
153
PAGE
164
169
PAGE
155
156
156
157
158
PAGE
165
PAGE
159
160
161
162
163