Panasonic Viera TX-P42GT50Y Operating Instructions Manual page 9

Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws
2 Pull out the pedestal from the TV.
3 Remove the assembly screw
4 Remove the assembly screws
5 Remove the assembly screws
Adjusting the panel to your desired angle
●
Do not place any objects within the full rotation range.
Preventing the TV from falling over
Using the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to the
installation surface.
●
The place where the pedestal is to be fixed should be thick enough and made of hard material.
from the TV.
from the cover.
from the bracket.
from the back of the base and pull out the neck.
(View from the top)
TX-P42GT50Y: 15°
TX-P50GT50Y: 10°
Screw (not supplied)
Diametre: 3 mm
Length: 25 - 30 mm
Screw hole
9