Panasonic Viera TX-P42GT50Y Operating Instructions Manual page 79

●
To repeat between the starting point "A" and finishing point "B"
Set "A" and "B" in order
The points will be reset by pressing this button
•
(blue)
again or other operations.
●
To change aspect
●
To confirm or change the current status (if available)
"Display the selectable settings for the current status" (p. 22)
■
Chapter List
You can start playback from the chapter list you select.
● The chapter list is not displayed while the selected content is being recorded.
To play back from the chapter list
(yellow)
Note
● Depending on the recorded programmes, some playback operations may not work properly.
■
To change the device
You can change to the other device directly in the same mode if two or more devices are connected.
1 2
Display the Select [Drive Select]
option menu
Option Menu
Create Group
Release Group
Drive Select
Contents Select
Change Protect Status
Audio output Settings
You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO OUT or HDMI2 (ARC function)
terminal.
●
To confirm or change the current sound status
1
Display the menu and Select [Sound]
Menu Item
SPDIF Selection
●
To display the subtitle (if available)
Chapter List
00:00:00 00:05:00
select
access
(p. 77)
Sound
select
access
Adjustments / Configurations (alternatives)
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT
and HDMI2 (ARC function) terminals [Auto] / [PCM]
[Auto]: Dolby Digital Plus, Dolby Digital and HE-AAC multi-channel are output as
Dolby Digital Bitstream. DTS is output as DTS. MPEG is output as PCM.
[PCM]: Digital output signal is fixed to PCM.
●
To the previous / next chapter
(red) /
A recorded content is automatically
•
divided into chapters (about 5 minutes
for each).
3
Select the device to access
Drive Select
EXIT
Select
RETURN
USB HDD1
SD Card
Access
USB HDD1
If you select the device to play back photos, videos or music,
change to the appropriate content.
●
To change the content
select [Contents Select]
access
2
Select [SPDIF Selection] and set
SPDIF Selection Auto
Reset to Defaults Reset
select
access / store
(green)
select
playback
select
access
USB Flash...
2/2
79