T-Psv Screen Description - Toshiba T-PSV Operation Manual

2.3 T-PSV screen description

When a configuration file is designated, the T-PSV read the configuration and the following
screen will appear.
Connection
configuration
Tag name, PLC name, register/device address and update cycle are specified by the
configuration file.
Actual update cycle shows the actual interval of data read from the PLC.
Actual data acquisition time shows the PLC's response time.
Status shows the communication status between the T-PSV and the PLC as follows.
Stopped:
Receiving: Data is receiving from the PLC within the specified update cycle.
Cycle over: Data could not be received within the specified update cycle.
Timeout:
Error:
Tag name
PLC name
Communication with the PLC is not executing.
There is no response from the PLC within the specified timeout setting.
Error response is received or TCP/IP is not ready.
Register or
Device
address cycle (sec)
Update cycle
2. Getting Started
Actual
update
Actual data
acquisition
time (sec)
Operation Manual
Status
13