Halfords Bike Rack User Manual

Halfords hi 3 bike instructions 6/8/07 12:01 PM Page 1
Made in the UK
Halfords Ltd, Washford
Redditch, B98 0DE
PI480-01
Metal Clamp High 3 Bike Carrier
Fitting Instructions
Please follow instructions carefully to ensure the safety of yourself and other road users.
The initial assembly and fitting of this carrier will take approximately 15 minutes.
Before you begin:
• Under no circumstances should this carrier be fitted to your car unless it is adjusted to
the exact settings specified in the enclosed vehicle application list. This carrier must
not be fitted to any vehicle not listed. If in any doubt ask in store.
• Due to the construction of boot lids we recommend only two cycles be carried on saloon
cars with this carrier
• Make sure all parts are included in the package.
• Ensure that the vehicle boot lid/rear bumper are free from dirt and grime.
Kit Contents
REFER TO THE SEPARATE
APPLICATION GUIDE TO
DETERMINE THE
CORRECT FITTING KIT.
x2
x2
x2
x2