Alarm List - WisyCom MTK952 User Manual

Alarm List

When an alarm occurs, the MTK952 can do one or more of the following acts:
A. Show a message on the display
B. Turn on the yellow or red alarm led
C. Insert the alarm on the alarm list in the
The alarm can be related to a specific transmitter (TX1 or TX2) or general.
Shown below the complete alarms list:
Alarms
TX Power Mismatch
TX Power reduced
Timeout 5 sec on PLL
Errore bus I2C
Timeout 5 sec on PLL
OL969
High internal
temperature
Fan #1 doesn't work
Fan #2 doesn't work
Recovered
configuration and
calibration data from
copy1 on the
memory
Recovered
configuration and
calibration data from
copy2 on the
memory
Load default
configuration and
calibration data
MAIN>Options>Info>Alarms menu
Code Type Message on display (A)
- TX ATTENTION: antenna mismatch!
High SWR on Tx out
0x05 TX ATTENTION: antenna mismatch!
High SWR on Tx out. Rf pwr
reduced
0x84 TX ATTENTION: RF PLL lock lost
general EEPROM access error
(only on TX1)
0x84 general ATTENTION: OL PLL lock lost
(only on TX1)
0x04 general ATTENTION: internal temperature
high
(only on TX1)
0x02 general ATTENTION: fan #1 does't work
properly
(only on TX1)
0x03 general ATTENTION: fan #2 does't work
properly
(only on TX1)
0x80 general no
0x81 general no
0x8D general no
MTK952 User Manual rev.02
Led Alarm list (C)
(B)
yellow no
yellow Tx power
reduced
red Rf PLL lock lost
red Error on I2C
bus
red OL PLL lock lost
yellow High internal
temperature
yellow Fan #1 doesn't
work
yellow Fan #2 doesn't
work
no Mem. copy1
recovered
no Mem. copy2
recovered
no Mem. init.
Service req.
15