Related Manuals for WisyCom MTP60
Summary of Contents for WisyCom MTP60
- Page 1 ––– MTP60 User Manual Wideband Wireless Professional Pocket Transmitter SN: ________________ Rev.01 (ref. FW 0.3) Date: 22 October 2021...
-
Page 2: Product Overview
MTP60 User Manual RODUCT OVERVIEW ❺ ❹ ❻ ❼ ❶ ❽ ❷ ❾ ❿ ❸ ❶ OLED white display (128 x 64 pixels) ❽ IrDa interface ❷ 4 setup buttons ❾ LED3 of recording ❸ battery compartment latch ❿ LED4 of recharging ❹... -
Page 3: Led Indications
MTP60 User Manual ED INDICATIONS LED 1 - audio and recording indication Fixed green unit is modulating regularly Blinking red Flash when audio is clipping OFF (grey) if it doesn’t modulate LED 2 - RF and battery indication Fixed red... -
Page 4: Display Menu
MTP60 User Manual DISPLAY MENU Setup menu are accessed in sequence:... -
Page 5: Audio Menu
“Factory” recalls the Wisycom factory configuration. “USER” (U01, U02…) recalls the configuration saved by menu “PRESET” recalls preset saved with the Wisycom Manager or pre-configured by Wisycom TUNING > Frequency menu In this menu current channel/group and frequencies can be setup. -
Page 6: Battery Substitution
MTP60 User Manual ATTERIES MTP60 works with 2 x AA battery, Lithium, NiMh or KLIC8000 lithium (5.6 Wh) (select correct type on setup controls). Battery status can be checked on internal OLED display or looking the LED2 status on front ❼. -
Page 7: Accessories And Parts
MTP60 User Manual ACCESSORIES AND PARTS AWF30-B1-507 AWF30-B1-590 AWF30-B8-950 For MTP60-US For MTP60-US For MTP60-US Band 470 -547 MHz Band 547 - 663 MHz Band 940 -960 MHz Antenna label Antenna label Antenna label Antenna label CAL48 Cable to connect an MTP30 (with option /PHA) or... -
Page 8: Technical Specifications
TX transmits also a digitally modulated sub-carrier, suitable for: • tone-squelch operating • remote battery monitoring • optional PTT (push to talk) operation Noise Reduction system ENS - Wisycom Extended-Sound Optimized AF bandwidth in NarrowBand Audio frequency response (dBa): • 45 Hz - 17 KHz (3dB) mode (NB) - Page 9 PART 74 & PART 15 MTP60-US 100mW FCC-ID: POUMTP60 RSS-123, RSS-102 MTP60-CA 100mW Canada IC: 11967A-MTP60 MTP60-EUX is not an SRD device, thus it requires specific authorization by your local frequency authority! Before putting the device into operation, please observe the respective country-specific regulations!
-
Page 10: Manufacturer Declarations
MTP60 User Manual MANUFACTURER DECLARATIONS In compliance with the following requirements RoHS Directive (2002/95/EC) WEEE Directive (2002/96/EC) Please dispose of the diversity transmitter at the end of its operational lifetime by taking it to your local collection point or recycling center for such equipment ... - Page 11 This radio transmitter IC: 11967A-MTP60 has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated.
-
Page 12: Safety Instruction
MTP60 User Manual The maximum SAR levels tested has been shown to be 1.2 W/kg at head with 0mm of separation distance from the body. This device operates on a no-interference, no-protection basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio license is required. For further details, consult Innovation, Science and Economic development Canada's Client Procedures Circular CPC-2-1-28, Voluntary Licensing of License-Exempt Wireless Microphones in TV Bands. -
Page 13: Declaration Of Conformity
MTP60 User Manual DECLARATION OF CONFORMITY... - Page 14 MTP60 User Manual Via Tiepolo, 7/E - 35019 Tombolo (PD) Italy Tel. +39 -0424 -382605 Fax +39 - 0424 - 382733 www.wisycom.com e-mail: sales@wisycom.com...
Need help?
Do you have a question about the MTP60 and is the answer not in the manual?
Questions and answers