Cub Cadet TANK L 48 Operator's Manual page 28

OIL CHART
Apply a few drops of SAE engine oil,
grease, or use a spray lubricant. Apply
the oil to both sides of pivot points. Wipe
off any excess. Start engine and operate
mower briefly to insure that oil spreads
evenly.
LUBRICATION CHART
Use a grease-gun filled with NO. 2
Multipurpose Lithium Base Grease
Engine Oil
• Shell Rotella® T Triple Protection™ 15W40
• Shell Rimula® 15W40
• Reference your engine manual for other approved options
Hydrostatic Fluid
• Cub Drive System Fluid Plus (Shell TT-SB)
• Castrol™ (Syntec®) Edge™ 5W50
28 S 6— M
ection aintenance
Number of Oil Points
DAILY
4
4
2
2
2
2
1
2
WEEKLY
1
2
2
2
1
1
1
4
2
2
Number of Grease Fittings Description
EVERY 25 HOURS
3
WEEKLY
2
2
2
Number of Grease Points
WEEKLY
2
1
1
& a
djuStMentS
Description
Deck Suspension Pivots
Height Adjustment Turnbuckle Clevis Pin
Height Adjustment Handle Pivots
Height Adjustment Stop Pivots
Deck Lift Linkage Pivots
Transport Handle Pivots
Transport Handle Pin
Deck Frame Up-and-Down Pivots
Seat Hinge
Steering Lever Linkage Rod End Bearings
Lever Return Assembly Rod End Bearings
Pump Control Lever Pivots
Brake Lever Pivot Clevis Pin
Brake Lever Control Rod Pivot
Brake Control Rod Swivel Joint
Brake Rod Clevis Pins
Brake Shaft Assembly Pivots
Grass Collection System Lid Hinges (If Mower is so equipped)
Blade Spindle Bearings
Front Caster Wheels
Front Caster Wheel Spindles
Mower Deck Ball Wheels
Description
Deck Take-Up Idler Pivots
Axle Pivot
Hydro Take-up Idler Pivot
Spindle Lubricant: Use only Shell Alvania RL 2 grease. This
grease is an amber-colored grease designed for high speed
bearing applications. It has a base oil viscosity that reduces
running losses, has been formulated for low noise, has excellent
corrosion protection, and has excellent bearing lubrication.
General Purpose Lubrication: Use any NLGI grade 2 multi-purpose
grease. Shell Albida EP2 is recommended. Shell Albida EP 2 is a
red-colored multi-purpose grease designed for heavy-duty bearing
applications. It has high base oil viscosity for mechanical stability,
has been formulated for high load, low-speed applications, and has
excellent lubrication and corrosion protection.