Samsung PE40C Manual page 137

6
Network
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are displayed.
How to set up manually
To set up your product cable network connection manually, follow these steps.
1
Go to the Network Settings
2
Select Start, press [
verification process starts.
3
Press [ ]. The verification process stops. Select
IP Settings
4
Select the field at the top, press [
5
Press the
6
Enter the first portion of the
keys on your remote. Press the right arrow button to go to the next field.
7
Enter the next portion of the
8
Repeat the entry process for each field in the
If you make a mistake when entering a number, re-enter the number to correct it. You can also
press the up or down arrow button to change the number one unit at a time.
9
When done entering the
10
Press the down arrow key to go to the
11
Repeat the same entry process for
12
When done, select
appears and the verification process starts. When the connection has been verified, the
connected
screen.
], and then press [
screen appears.
], and then set
button on your remote to go to the
IP Address
IP Address. Press the right arrow button to go to the next field.
IP Address, press [
Subnet
OK at the bottom of the page, and then press [
successfully." message appears.
] again. The network test screen appears and the
IP Settings on network connection screen. The
IP Settings to
IP Address entry field, and then press [
(for example, 105) into the first entry field using the number
IP Address.
].
Subnet Mask fields, and then press [
Mask, Gateway, and
Enter manually.
].
].
DNS Server.
]. The network test screen
"Internet is
6 Network
137