Zoom/Position - Samsung PE40C Manual

4
Screen Adjustment
4:3: Sets the picture to basic (4:3) mode.

Do not set your product to 4:3 format for a long time. The borders displayed on the left and right,
or top and bottom of the screen may cause image retention (screen burn) which is not covered by
the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or

Component (1080i / 1080p) signals are inputted.
Custom: Changes the resolution to suit the user's preferences.

Original ratio(Original

DisplayPort, the video will display in the original aspect ratio.
Available ports may differ depending on the model. (page 30)
You can adjust and store settings for each external device you have connected to an input on the
product.
Picture Sizes available by Input Source.
AV, Component
Component
HDMI (720p, 1080i, 1080p)
PC, DVI, DisplayPort,
HDMI(when a PC is connected)

4.3.2 Zoom/Position

Adjusts the picture position.
or Screen fit.
To use the Position

steps.
1
Press the
2
Press the [
3
Press the
4
Press the [
5
Select Close
Reset.
To use the Zoom/Position

Component
Ratio): If the input source is PC, DVI,
Input Source
(480i, 480p)
(1080i, 1080p)
Position is only available if
function after selecting Zoom1, Zoom2,
button to select Position.
] button.
or button to move the picture up or down.
] button.
by pressing the and
function after selecting
(1080i/1080p) or Custom, follow these steps.
HDMI
Picture Size
16:9, Zoom1, Zoom2, 4:3,
16:9, Wide Fit, 4:3,
16:9, Smart View
4:3, Screen Fit, Custom
16:9, 4:3, Original ratio(Original
Picture Size is set to Zoom1, Zoom2,
Wide Fit
buttons sequentially. To reset the picture position, press
Screen Fit in HDMI
(PC connection), or
Custom
Screen Fit, Custom
1, Smart View 2, Wide Fit,
Ratio)
Wide Fit
or Screen fit follow these
(1080i/1080p) or
4 Screen Adjustment
120