Table of Contents
Advertisement
This manual explains the proper use of your new
heat pump. Please read this manual carefully before
using the product. This manual should be kept in a
safe place for handy reference.
CONTENTS
• IMPORTANT SAFETY INSTRUCTIONS ...............1
• PART NAMES ........................................................2
• USING THE REMOTE CONTROL ........................4
• SETTING AIR PURIFYING FILTER ......................5
• TIPS ON SAVING ENERGY ..................................5
• AUXILIARY MODE ................................................5
• BASIC OPERATION ..............................................6
• ADJUSTING THE AIR FLOW DIRECTION ...........7
• COANDA AIRFLOW ..............................................8
• SPOT AIR ..............................................................8
• FULL POWER OPERATION .................................9
• ENERGY SAVING OPERATION ...........................9
• 1.2.3.5h OFF TIMER ...........................................10
• TIMER OPERATION ...........................................10
• PLASMACLUSTER OPERATION .......................12
• SELF CLEAN OPERATION .................................12
• VACANCY OPERATION ......................................13
• ADDITIONAL NOTES ON OPERATION .............13
• MAINTENANCE ..................................................14
• BEFORE CALLING FOR SERVICE ....................15
• SPECIFICATIONS ...............................................15
IMPORTANT SAFETY
INSTRUCTIONS
WARNINGS FOR USE
1
This model should be installed with a fixed
power cord to the meter box.
2
Be careful not to expose your body to the outlet
air for prolonged periods. It may affect your
physical condition.
3
When using the unit for infants, children,
elderly, bedridden or disabled people make
sure the room temperature is suitable for those
in the room.
4
Never insert objects into the unit. Inserting
objects can result in injury due to the high
speed rotation of the internal fans.
5
If anything abnormal is noticed with the
air conditioner (eg burning smell), stop the
operation immediately and turn the circuit
breaker off.
6
This unit should be installed by a licensed heat
pump contractor in accordance with AS/NZS
3000 and your electricity suppliers service
rules.
7
There are local council rules regarding
maximum allowable noise levels emitted by
heat pump, your licensed heat pump contractor
will advise you on the correct location of your
outdoor unit.
8
If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agent or a similarly qualifi ed person in order
to avoid a hazard. Use only the manufacture-
specifi ed power cord for replacement.
9
Do not pour water directly on the unit. Water
can cause electrical shock or equipment failure.
IMPORTANT SAFETY
INSTRUCTIONS
WARNINGS FOR INSTALLATION/REMOVAL/
REPAIR
For your safety, ensure that your new heat pump
is installed by a licensed heat pump contractor in
accordance with the AUSTRALIAN/NEW ZEALAND
WIRING RULES.
• Do not attempt to install/remove/repair the unit by
yourself. Incorrect installation could cause electric
shock, water leak, fi re etc.
heat pump contractor for the installation/removal/
repair of the unit.
CAUTIONS FOR USE
1
If a gas appliance is used in the same room as
the heat pump, ventilate the room periodically
to prevent oxygen depletion.
2
For safety, do not touch the unit with wet hands,
it may cause an electric shock.
3
For safety, turn the circuit breaker off when not
using the unit for an extended period of time.
4
For safety, do not place anything on top of the
outdoor unit or step on it.
5
This unit is designed for residential use. Do not
use for other applications such as in a kennel
or greenhouse to raise animals or grow plants.
6
Do not block the air inlets or outlets of the unit.
It may result in degraded performance or unit
damage/failure.
7
For safety, be sure to turn the unit off at
the circuit breaker before performing any
maintenance or cleaning.
8
This appliance is not intended for use by young
children or infirm persons unless they have
been adequately supervised by a responsible
person to ensure that they can use the
appliance safely.
Young children should be supervised to ensure
that they do not play with the appliance.
CAUTIONS FOR LOCATION/INSTALLATION
To ensure that your warranty is not affected, both
the indoor/outdoor units and supply/interconnecting
cables must be installed by a licensed heat pump
contractor.
• The unit is designed to operate on 220-240 VAC,
50Hz.
• Do not install the unit where fl ammable gas may
leak. It may cause a fi re.
1
Consult a licensed
Hide quick links:
Advertisement
Table of Contents
