Installing Activex - HISTREAM Mega Pixel IP Camera User Manual

Step1: Connect power supply (DC 12V)
Step2: Connect LAN port with router/network switch/ hub via RJ45 cable.
2.2.2 2.2.2 Connect Connect LAN LAN
2.2.2 2.2.2 Connect Connect LAN LAN port
The Light of LAN port turns green within 5 seconds under the normal network situation after power
on.
3 3 3 3 Searching Searching Searching device device
Searching device device and
3.1 3.1 Searching Searching device device
3.1 3.1 Searching Searching device device and
Run "SearchNVS" to find the default IP and modify mega pixel ip camera network parameters
according to clients' local PC IP gateway (Such as IP address, subnet mask, gateway and so on)
How to run "SearchNVS",
A: Find the NVSCenter software in 【Application】file from the CD.
�
B: Install the NVSCenter software, then do it as follows to find SearchNVS: 【Start】---【all
�
programs】--- 【NVS Center】---【Search NVS】.
Note Note
� � � � Note Note：
1. The factory settings of the IP Camera as follows IP: 192.168.55.160; Subnet mask:
255.255.255.0.
2.
User name: admin; Password: admin
3. Run the SearchNVS software to search and modify IP Camera network parameters .It is
multicast protocol. But the firewall forbids the multicast data packet. So please close the firewall
first.
(1)Click SearchNVS
(1)Click (1)Click (1)Click【SearchNVS SearchNVS】button SearchNVS
【Local IP】Display the local PC IP. If your PC is NIC or multi-addressed local IP, please select one
IP address to connect NVS.
port port with with PC PC via via
port with with PC PC via via RJ45
and and installing installing
and installing

installing ActiveX

and and modify modify network network
and modify modify network network parameters
button button to to to to run run SearchNVS
button run SearchNVS run SearchNVS software SearchNVS
RJ45 RJ45 cable. cable.
RJ45 cable. cable.
ActiveX ActiveX
ActiveX
parameters parameters
parameters
software
software as software
6/ 36
as follow:
as as follow: follow: follow: