HISTREAM Mega Pixel IP Camera User Manual

Mega pixel ip camera

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Mega

Mega Pixel

Our corporation reserves the right to make any update to this manual without

notice.

Pixel

Pixel IP IP IP IP Camera

----User

----User Manual

Packing List:

1. Mega Pixel IP Camera

2. DC12V Power Adapter

3. User Manual

4. CD

5. Warranty Card

Camera

Manual

1 pc

1pc

Table of Contents

Need help?

Do you have a question about the Mega Pixel IP Camera and is the answer not in the manual?

Questions and answers

Summary of Contents for HISTREAM Mega Pixel IP Camera

Page 1 ----User Manual Manual ----User ----User Manual Manual Packing List: 1. Mega Pixel IP Camera 1 pc 2. DC12V Power Adapter 1 pc 3. User Manual 4. CD 5. Warranty Card Our corporation reserves the right to make any update to this manual without...
Page 2: Table Of Contents
1.2 Basic Specification ......................... 3 1.3 Hardware requirement ......................4 2 Appearance and Installation ......................5 2.1 Backside connection of mega pixel IP Camera ..............5 2.2 Hardware installation ......................... 5 3 Searching device and installing ActiveX ..................6 3.1 Searching device and modify network parameters ..............6 3.2 Checking connection .........................
Page 3: Product Overview
Product Overview Overview 1.1 Main Features � User can visit the mega pixel ip camera live image and playback in IE. � It supports max 10 users visit it at the same time. � Local PC storage or network storage permitted, it is built-in SD slot and supports several network storage protocols.
Page 4: Hardware Requirement
Image Sensor CMOS：1/3 inch deinterlace CMOS sensor. Min 1.5Lux Video Compression H.264 Main Profile Two Streaming Primary and Secondary streaming H.264 & MJPEG Video Resolution CMOS: 1600*1200, 1280*960, 1280*720. Video Parameters CMOS: Brightness, Chroma, Saturation, gamma, Contrast, Acutance, Red, Blue and Image quality. Streaming Type Pure Video Streaming or Audio and Video streaming.
Page 5 ◆ CPU: Pentium 2.8 GHz ◆ Memory: 512 MB ◆ Graphic Card: TNT2 ◆ Sound Card: Speaker, Two-way talk ◆ Hard Disk: Bigger than 40G Recommended configuration for hardware ◆ CPU: Dual-core 2.6GMhz ◆ Memory: 1GB ◆ Graphic Card: Nvidia Geforce FX5200 or ATI RADEON 7000(9000) series 256MB video memory Operation System ◆...
Page 6: Hardware Installation
2 2 2 2 Appearance Appearance Installation Appearance Appearance and and Installation Installation Installation Backside Backside Backside Backside connection connection connection connection of of of of mega mega mega mega pixel pixel pixel pixel IP IP IP IP Camera Camera Camera Camera Note：...
Page 7: Installing Activex
Run “SearchNVS” to find the default IP and modify mega pixel ip camera network parameters according to clients’ local PC IP gateway (Such as IP address, subnet mask, gateway and so on) How to run “SearchNVS”, A: Find the NVSCenter software in 【Application】file from the CD.
Page 8 “Enter” button, you will get following information: Now please remember the above IP Address, Subnet Mask, Default Gateway，then set the IP address of mega pixel ip camera according to your local PC IP address. For example :192.168.１.100. Please make sure the Default Gateway and Subnet Mask to be same.
Page 9: Checking Connection
You need to install ActiveX when you visit mega pixel IP camera for the first time through Internet Explorer. How to install ActiveX: Download the ActiveX from Internet Explore: input the IP address of mega pixel IP camera in Internet Explore;...
Page 10 Note: ActiveX have to be installed. Close current Internet Explorer, click “Install” button，it will be installed the ActiveX and shows “Install OK！”. Open one Internet Explorer, and input IP address of IP Camera，for example:192.168.55.160, it will show: Input User name (Default: admin)、Password (Default: admin)，click “Submit” to show as follows: Date,Time,Frame,Bitrate Image display...
Page 11: Liveview
4. 4. 4. 4. Software Software Software configuration configuration mega mega pixel pixel pixel IP IP IP IP Camera Camera Camera Software configuration configuration for for mega mega pixel Camera 4.1 Liveview Liveview Liveview Liveview In the Liveview interface, User can do the operations as snap, record, replay, call, and speaker, cancel alarm, check log, digital zoom in, full screen, P/T control, and video parameters and image Set.
Page 12 Zoom In In In In】it has digital zoom in on the video as follows. 【Full Full Full Full Screen Screen Screen Screen】full screen for display. Mega pixel IP Camera: brightness, saturation, acutance, red, blue, gamma, contrast as follows： 11/ 36...
Page 13: Playback
Playback Playback 4.2 Playback Playback Click【Replay】button as: , then it appears the following interface: User can select the resolution when replaying. User can search the recorded image files or snapped pictures in local PC or SD card according to date. 【Date】User can check the recorded image files or snapped pictures according to the appointed date, click the button as : It appears:...
Page 14: Time Table
Check the current recorded image files or snapped pictures in the list as follows: There are two Lists: Record & Picture: Record List means the recorded image in PC on Feb 10, 2009 Pic List means the snapped picture in PC on Feb 10, 2009 The left of the Record / Pic List is Hour unit (from 0 to 23) The right of the Record / Pic List is Minute unit (from 0 to 59) The yellow icon means the image recorded / picture snapped in the current selected time.
Page 15: System
Settings as as follows follows： Mega pixel IP camera system set 【Time Sync】click: “Time Sync”，The system time of the device will be synchronous with computer . 【NTP Parameter】Please input the correct NTP server address and select the correct time zone.
Page 16 Video 4.4 Video Video （1） Mega pixel IP camera Video set 【Title】rename the video name, displaying on the lower left corner. 【OSD】display channel name, date, time, week and frame / bit rate. 【Position Adjustment】move the OSD position on video. 【Video Coding】set the preferred stream and alternate stream.
Page 17: Video
【Advanced】select this option to set other parameters. 【I frame interval】When the network bandwidth is not good, it is good way to increase the I frame interval to make the image fluently. The range of I frame interval is 0～200.The smaller I frame interval, better image quality. Normally, I frame interval is twice as frame rate.
Page 18: Motion Alarm
【Video Flip】Image reversal switch After setting, click the 【save】button. Motion alarm 4.5 Motion Motion Motion alarm alarm alarm Motion alarm set： 17/ 36...
Page 19: Sensor Alarm
Motion alarm set: included schedule time, switch of the alarm, sensitivity, alarm output, alarm record or alarm snap sending by FTP.And snap sending by email. (Default storage SD card without selecting email or FTP) 【Schedule Set】set the two schedule times for motion alarm detection. 【Alarm output】alarm signal output.
Page 20: Network Fault Alarm
interval time of capturing is the duration time.1 snapped picture per 1 second. 【Record】 set alarm record sending by FTP. After setting, click the 【save】button. Network Network fault fault alarm alarm 4.7 Network Network fault fault alarm alarm Network Network fault fault alarm...
Page 21 Set IP address, Subnet mask, Gateway, MAC, Data port, HTTP port, DNS address. The device will restart after setting the basic parameters and saving. If it is in LAN, the IP address can’t be same as LAN computers’ IP. Wifi Setting. It is suitable for wireless network environment.
Page 22: Advanced
DDNS server. 【DDNS Address】When the DDNS address is the domain Name, please set the DNS address correctly. Note: Note: Note: Note: The default DNS address is Guangdong China DNS address. If users are in other regions to use DDNS function, please set the correct DNS address for the device same as the user local DNS address.
Page 23: User Management
will send the alarm mail to the designated email box automatically. 【Snap picture】When there is a motion alarm or a sensor alarm, the device will snap the picture and storage it on the local PC. Setting FTP Setting Setting Setting The Snap picture can be transferred to the FTP server which is assigned.
Page 24: Terminal
You can set three users for one IP Camera. One user is Administrator and others are Guest. Administrator can set parameters for the IP Camera. However, Guest cannot set parameters. Note: Note: Note: Note: User name can be composed of letters, numbers, underline or dot between 1 and 16 characters.
Page 25 Check the SD information: Total size, free size and format SD card. 【Code stream】set the code stream when recording, it can be selected preferred stream or alternate stream；the packet time for recorded file is the time of image recording. 【other parameters】when there is no space for recording, the files recorded one hour ago will delete automatically.
Page 26: Local Set
Set schedule time for snapping: When it starts the sending by email or FTP, the time interval should be more than 0.3 second. If users don’t select the FTP and email, and the device without SD, it will stop the snapping schedule. Note: the picture resolution can be set in “Video set”.
Page 27 Appendix Appendix Appendix 3 3 3 3 Visits Visits Visits Visits IP IP IP IP Camera Camera Camera under under different different network network environment environment Appendix Camera under under different different network network environment environment You can use your laptop or PC to connect the IP camera through LAN or Internet, the following will show you how to use IP Camera under the different network environment.
Page 28 The network setting please checks the following: If you have an IP camera with WiFi, you have to set the IP address, the subnet mask and gateway address in" WiFi parameters” according to your wireless router. Setting Setting Step Step Setting Setting Step Step：...
Page 29 Users login IP camera via the IE browser, set [network] and [DHCP] parameters, after settings clicks [Save] to restart IP camera then the settings become effective. 2 2 2 2 、Internet Internet Internet Internet You can connect the IP camera with Internet through three ways: Fixed IP mode, ADSL and router sharing accesses the internet mode, ADSL and IP camera’s PPPoE accesses the internet mode.
Page 30 Three：Input the correct subnet mask，for example：255.255.255.192； Four：Input the correct gateway address，for example：218.84.31.131； After setting，click【Save】 to restart IP camera. � � � � ADSL and router sharing accesses the internet mode. linking linking drawing drawing following following The linking linking drawing drawing as as the the following...
Page 31 Step Step Step Step: : : : One: login DDNS server （ i.e.http://www.mvddns.net），Register username and password. （ The Appendix 3 3 3 3 ） Appendix operation please refer to Appendix Appendix Two：Click to open DDNS； Three：Choose DDNS server, for example:http://www.mvddns.net； Four：Input the Registration name；...
Page 32 Six：Input domain name address which applies to the DDNS server， for example:test.mvddns.net； Seven: Input the DDNS IP address, for example www.mvddns.net； Eight：Input the DDNS server port, default port:30000； Nine：Input the public data port No. which assign via port forwarding, default port:5000, Ten：Input the public WEB port No.
Page 33 PPPoE username and password which applies from the network provider. pendix pendix pendix 4 4 4 4 FAQ Appendix ( ( ( ( 1 1 1 1 Forget Forget Forget Forget Password Password Password Password Answer: Answer: Answer: Answer:【 RESET】 on the IP Camera back, press it to retrieve all parameter to default (Factory Setting).The default user name: admin, password: admin (2 (2 (2 (2 No No image...
Page 34 Reason Reason Reason 1: 1: 1: 1: Internet offline. Reason Answer: Answer: Answer: Answer: If it is an error of network connection, do the following steps: Connect PC to network to test whether they work normally or not. Reason Reason Reason Reason 2: 2: 2: 2: IP Address was occupied by other device.
Page 35 Note Note Note Note：start DirectDraw speedup、Direct3D speedup、AGP veins speedup in DirectX functions。If they can not be started, that means the DirectX installation failure or hardware no display. （10 10 Small Small Small Small image image image image size size size size under under under...

HISTREAM Mega Pixel IP Camera User Manual

Quick Links

Need help?

Questions and answers

Related Manuals for HISTREAM Mega Pixel IP Camera

Summary of Contents for HISTREAM Mega Pixel IP Camera

Table of Contents