Wireless Connection Setup; Setting Up A Wireless Connection Using The Wps Button - Huawei WS322 User Manual

5 Configuring WiFi Repeater Mode
The configuration succeeded.
After the configuration, the WS322's SSID and password will be synchronized
to those of the connected network. Enter the SSID and password of the WLAN
when connecting the WS322 to other devices.

5.2 Wireless Connection Setup

5.2.1 Setting Up a Wireless Connection Using the WPS
Button
Push the WPS button once to quickly set up a wireless connection between the
WS322 and any WPS-capable device. Before you set up a wireless connection using
the WPS button, verify the following:
The wireless network security mode of the WS322 is WPA2-PSK or

WPA-PSK/WPA2–PSK.
The wireless device (laptop, tablet, or mobile phone) to connect to the WS322

is WPS-capable.
Step 1 Press the WPS button on the wireless device to start WPS negotiation.
For details, see the user guide for the wireless device.
Step 2 Within 2 minutes, press and hold the WPS button on the WS322 for 1
second or more. The WPS indicator blinks.
When the WPS indicator on the WS322 is steady on, a connection between the
WS322 and wireless device is set up. The WPS indicator is on for 300 seconds. Then
the WPS indicator turns off.
WS322 300Mbps Wireless Router
5-4
User Guide