Access Codes - Nokia 6800 User Manual

Access codes

• Security code (5 to 10 digits):
The security code protects your
phone against unauthorised use,
and is supplied with the phone.
The preset code is 12345. When
you have changed the code, keep
the new code secret and in a safe
place separate from your phone.
To change the code, and to set
the phone to request it, see
"Security settings"
If you key in an incorrect security
code five times in succession, the
phone may display
Wait for five minutes and key in
the code again.
• PIN code and PIN2 code (4 to 8
digits): The PIN (Personal
Identification Number) code
protects your SIM card against
unauthorised use. The PIN code is
usually supplied with the SIM
card.
Set the phone to request the PIN
code each time the phone is
switched on, see
settings" on page 49.
The PIN2 code may be supplied
with the SIM card and is required
to access some functions, such as
charging unit counters.
on page 49.
Code error.
"Security
Copyright © 2004 Nokia. All rights reserved.
If you key in an incorrect PIN
code three times in succession,
the phone may display
blocked and ask you to key in the
PUK code. Contact your service
provider to obtain the PUK code.
• PUK and PUK2 codes (8 digits):
The PUK (Personal Unblocking
Key) code is required to change a
blocked PIN code. The PUK2 code
is required to change a blocked
PIN2 code.
If the codes are not supplied with
the SIM card, contact your local
service provider.
• Barring password (4 digits): The
barring password is required
when using the
service, see "Security settings"
page 49. You can obtain the
password from your service
provider.
• Module PIN and signing PIN:
The module PIN is required to
access the information in the
security module. See
module" on page 76. The signing
PIN is needed for the digital
signature. See
on page 78.
PIN code
Call barring
on
"Security
"Digital signature"
xi