Working With Buttons; Getting Library Messages; Getting Mailbox Status - ADIC Scalar 100 User Manual

Table 2 Drive Status Area Indications (Continued)
Indicator
*Please call ATAC for assistance in interpreting these errors as they may be caused by erroneous signals from the drive.

Working with Buttons

The button area is a dynamic area of the Operator Panel. Depending on the menu, the buttons available
here will change. To make a selection, press the appropriate soft key below that button in the button area.

Getting Library Messages

The message area of the Operator Panel displays six lines of text, graphic representations, or a combination
of both to show interactive dialogs, special messages, alerts, and library configurations.
If an error or operator intervention message occurs, refer to

Getting Mailbox Status

The Mailbox indicator area provides constant status on the library Mailbox. The icons displayed in the
Mailbox indicator area and their meanings are described in
Table 3 Mailbox Indicator Area Icons
Media Type Indicator
All
Scalar 100 User's Guide
Description
A tape drive is unloading a cartridge.
A tape drive has unloaded a cartridge.
A tape drive is reading data from a cartridge.
A tape drive is writing data to a cartridge.
A tape drive is erasing data from a cartridge.
A tape drive is locating data on a cartridge.
Description
This indicator is displayed if the host has issued a
PREVENT/ALLOW MEDIUM REMOVAL SCSI command and locked
the Mailbox.
Troubleshooting and Help
Table 3.
on page 101.
47