Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Tissot T-Touch
Summary of Contents for Tissot T-Touch
- Page 1 T-Touch, multifunctions User’s manual Minutes hand + correction / chrono Hour hand Rotating bezel Activation-validation - correction / chrono Digital display Scratch-resistant sapphire tactile glass Page Synchronisation Display mode Setting the time Setting the date Selecting the units 10-11 Tactile area 110_F/06.03...
- Page 2 2/15 110_F/06.03...
-
Page 3: Replacing The Battery
Congratulations Congratulations on choosing to buy a Tissot watch, a Swiss brand with one of the greatest reputations in the world. Your T-Touch watch incorporates state-of-the-art technology. It offers permanent analogue display of the time as well as varied digital displays. In addition, the following functions are available by simply touching the crystal: meteo, alti- meter, chronograph, compass, alarm and thermometer. - Page 4 Validation of the setting (1) Procedure allowing the digital display to be synchronised with the hands. Note: it is not necessary to perform this synchronisation operation when the digital display and the hands show the same time. www.tissot.ch 4/15 110_F/06.03...
- Page 5 (3) This procedure is valid when the crystal with the hands. is activated for the ALTIMETER, CHRONO, Note: it is not necessary to perform this synchronisation COMPASS, ALARM, THERMO and METEO functions. operation when the digital display and the hands show the same time. 110_F/06.03 5/15 www.tissot.ch...
-
Page 6: Setting The Time
(1) Accuracy: -0.3 to +0.5 seconds / day. (2) Pressing continuously on allows continuous advance of the setting. After one complete revolution, the minute hand stops and the hour hand advances in one hour steps. www.tissot.ch 6/15 110_F/06.03... - Page 7 Validation of the setting (1) The calendar is semi-perpetual, that is the number of days per month is predefined. For February it is necessary to reset the date when it is only 28 days. 110_F/06.03 7/15 www.tissot.ch...
- Page 8 Selecting the units Activation of the crystal 1" Selecting the "Units" mode Activation of the setting 2" Selecting "Celsius degree / metre" or "Fahrenheit degree / foot" Selecting "12" or "24" hours Validation of selections www.tissot.ch 8/15 110_F/06.03...
- Page 9 (1) For more information, see the explanation of the meteo function on page 18. (2) The two hands indicate a tendency while the digital display gives a calculated pressure in hectoPascal. After 30 seconds, the digital display returns to "h-m-s" mode. 110_F/06.03 9/15 www.tissot.ch...
- Page 10 (1) Resolution: 1/100 of a second Measuring range: 9 h 59' 59'' and 99/100. (2) After 30 seconds, the hands display the time again but the digital display remains in CHRONO mode. After 10 h, the digital display returns to "h-m-s" mode". www.tissot.ch 10/15 110_F/06.03...
- Page 11 Activation of the crystal 1" Activation of the chronograph Starting the chronograph Displaying the intermediate time (eg. 48'' and 15/100) Restarting the chronograph, taking into account the running time Stopping the chronograph (eg. 2' 54'' and 88/100) Resetting the chronograph 110_F/06.03 11/15 www.tissot.ch...
- Page 12 Validation of the setting (eg. 2° East) (1) The minute hand points to the North. A more accurate reading is obtained by holding the T-Touch horizontally. The digital display gives the set magnetic deviation. After 30 seconds, the digital display returns to "h-m-s"...
- Page 13 Deactivation of the alarm Setting the time 2" Incrementation or decrementation 1 minute by one minute Validation of the setting (1) When the programmed time is reached, the alarm can be stopped by pressing one of the pushers. 110_F/06.03 13/15 www.tissot.ch...
- Page 14 ALTIMETER mode. After 10 h, the digital display returns to "h-m-s" mode (2) The adjustment shows the altimeter setting at the value of the actual altitude. For more information, see the explanation of the altimeter on page 22. www.tissot.ch 14/15 110_F/06.03...
- Page 15 (2) The temperature is displayed in degrees Celsius or in degrees Fahrenheit depending on the units selected (see "selecting the units" on page 8). After 30 seconds, the hands display the time again but the digital display remains in THERMO mode. TTouch_procedures 110_F/06.03 15/15 www.tissot.ch...
Need help?
Do you have a question about the T-Touch and is the answer not in the manual?
Questions and answers