Call Charge Smdr Output - NEC 1232 AK Series Operation Manual

Call Charge SMDR Output

In Hotel/Motel environment, you can output the total call charge of each guest telephone to SMDR printout.
All outside calls, which include the dials stored in Charge Code Table, are charged according to the
corresponding charge rate. Optional (charge in one minute increment) or fixed (charge per call) rate is
applied on a Trunk line basis by system programming. If the total charge exceeds the programmed maximum
call charge, the system sets Dial Block to prohibit outside calls from that extension.
SMDR Output Example
CLS DATE
OTG 27/09/99 17:06:43
TOTAL CALL CHARGE
Note1: The total charge is output with or without a decimal point (for auxiliary currency unit, like 00001.00) by
system programming. The possible maximum value of total charge is 9999999. If the total charge
exceeds the maximum value, the maximum value is output.
Note2: Output/Clear Call Charge operation is available on No.10 extension or all extensions by system
programming.
To output Total Call Charge of
To clear Total Call Charge of an
TIME LINE DURATION
01 00:01:23
TEL NO.:011
1. Lift the handset or press
2. Press
an extension:
3. Dial
4. Dial the extension no. to output the call charge. (e.g. 11)
5. Dial
6. Hang up.
1. Lift the handset or press
2. Press
extension:
3. Dial
4. Dial the extension no. to output the call charge. (e.g. 11)
5. Dial
6. Hang up.
ST# DIALED#
11 12345678901
CALL COUNT:001
SPK
ICM
key.
# .
∗ ∗
.
6
SPK
ICM
key.
∗ .
#
∗
.
7
Other Features
PAGE 001
RING ACCT NO.@<
TOTAL 0000100
key.
key.
@<
@<
@<
73