Robertshaw 9600 User Manual
  1. Manuals
  2. Brands
  3. Robertshaw Manuals
  4. Thermostat
  5. 9600
  6. User manual

Robertshaw 9600 User Manual

Digital 5-2 day programmable 1 heat / 1 cool thermostat
Hide thumbs Also See for 9600:
Table of Contents

Advertisement

Quick Links

I N T E G R A T E D C O M F O R T S O L U T I O N S
110-653B

Installation Guide

IMPORTANT SAFETY INFORMATION WARNING:
•
Always turn off power at the main power source by unscrewing
fuse or switching circuit breaker to the off position before installing,
removing, cleaning or servicing thermostat.
•
Read all of the information in this manual before installing or
programming this thermostat.
•
This is a 24V AC low-voltage thermostat. Do not install on voltages
higher than 30V AC.
•
All wiring must conform to local and national building and electrical
codes and ordinances.
•
Do not short (jumper) across terminals on the gas valve or at the
system control to test installation. This will damage the thermostat
and void the warranty.
9600
®
™
1
DIGITAL
PROGRAMMABLE
THERMOSTAT
G
E
GAS
ELECTRIC
5 - 2 Day Programmable
1 Heat / 1 Cool
User's Manual
Quick Start
Installation and
Programming

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 9600 and is the answer not in the manual?

Questions and answers

Related Manuals for Robertshaw 9600

Summary of Contents for Robertshaw 9600

  • Page 1: Installation Guide

    9600 DIGITAL PROGRAMMABLE THERMOSTAT ® ™ I N T E G R A T E D C O M F O R T S O L U T I O N S ELECTRIC 5 - 2 Day Programmable 1 Heat / 1 Cool User’s Manual...

  • Page 2: Replacing Existing Thermostat

    Features • Four setpoints for weekday programming—two setpoints for weekend comfort. • Two “AA” ENERGIZER brand batteries retain program memory, even during power outages. • Low battery indicator. • Fahrenheit/Celsius display option. • Programmable from 45°F (4°C) to 90°F (32°C). •...

  • Page 3: Installation

    Figure 1 Installing Item 9600 Thermostat NOTE: F , 4-5 OR NEW INSTALLATIONS MOUNT THERMOSTAT ON INSIDE WALL FEET ABOVE THE FLOOR O NOT INSTALL BEHIND A DOOR IN A CORNER NEAR AIR VENTS IN DIRECT SUNLIGHT OR NEAR ANY HEAT OR STEAM GENERATING FIXTURES...

  • Page 4: Mounting Holes

    Figure 3 MOUNTING HOLES PROG MORN DAY EVE NITE CHANGE AUTO/MAN Elec COOL OFF HEAT FAN AUTO ON 7. Drill the marked holes using a 3/16” drill bit. Note: Enclosed plastic anchors do not require a drilled hole for drywall. 8.

  • Page 5: Set Time, Day, Temperature Differential

    13. Install two “AA” ENERGIZER brand batteries or equivalent into bat- tery compartment. Be sure to match positive (+) ends of batteries with positive (+) battery terminals in the battery compartment. The display will show as follows: 14. Replace cover onto thermostat by snapping into place. 15.

  • Page 6: Setting Daily Programming

    3. Press Press SET P To change Temperature Differential* 1°. T EMPERATURE IFFERENTIAL IS ACTORY PRESET AT HIS MEANS THAT WHENEVER THE ROOM TEMPERATURE CHANGES BY ONE FULL DEGREE FROM THE TEMPERATURE SETTING THE SYSTEM WILL TURN ON F THE SYSTEM TURNS ON TOO OFTEN INCREASE THE TEMPERATURE DIFFERENTIAL Changing Fahrenheit (F) to Celsius (C)

  • Page 7: Begin Programmed Operation

    4. Press SET. SET PR PROG SET PROG/MAN COOL-OFF-HEAT AUTO - ON 5. Press ✞ or ✟ to change MORN temperature. 6. Repeat Steps 2-5 for DAY, EVE, and NITE. COOL-OFF-HEAT 7. Shift COOL-OFF-HEAT switch to HEAT position. 8. Repeat steps 2-6 to program HEAT (winter) settings. NOTE: OTH SUMMER AND WINTER PROGRAMS USE THE SAME TIME SETTINGS Your thermostat is now programmed for summer and winter operation.

  • Page 8: Temporary Program Override

    Temporary Program Override To temporarily increase or decrease temperature Press ✞ or ✟ PROG SET PROG/MAN COOL-OFF-HEAT AUTO - ON The Thermostat will automatically return to the program at the next scheduled setting change. Manual Operation 1. Press PROG/MAN until indicator is in MAN position. PROG T PROG/MAN PROG...

  • Page 9: To Test Thermostat

    To Test Thermostat WARNING: DO NOT SHORT (JUMPER) ACROSS TERMINALS OF GAS VALVE OR SYSTEM CONTROL TO TEST OPERATION. THIS WILL DAMAGE THE THERMOSTAT AND VOID YOUR WARRANTY. CAUTION: D 50°F O NOT SWITCH SYSTEM TO COOL IF THE TEMPERATURE IS BELOW (10°C).

  • Page 10: Troubleshooting

    Troubleshooting Symptom Remedy Thermostat does not turn Check Wiring on system (See INSTALLATION) Check fuse. Replace with 2 amp Slo-Blo fuse if fuse has opened. Thermostat turns on and off too frequently. Increase Temperature Differential (See PROGRAMMING). Display is blank, flashing or Replace batteries.

  • Page 11: Wiring Diagrams

    Wiring Diagrams The following is just a sample of the most common types of HVAC sys- tems. Refer to your systems installation manual for wiring information. HEAT ONLY HEAT/COOL 3-WIRE 4-WIRE SINGLE TRANSFORMER SINGLE TRANSFORMER Factory- Installed Factory-Installed jumper jumper Transformer Transformer 24 VAC...

  • Page 12: Five-Year Limited Warranty

    FIVE-YEAR LIMITED WARRANTY Maple Chase Company warrants to the original contractor installer or to the original consumer user, each new Maple Chase thermostat to be free from defects in materials and workmanship under normal use and service for a period of five (5) years from date of purchase. This warranty and our liability does not apply to batteries or the merchandise that has been damaged, caused by misuse, neglect, mishandling, alterations, improper installation, or use in a way other than in accordance with...

Table of Contents

Save PDF