Wireless Adapter; Rules And Regulations - Hitachi TB-1 User Manual

Wireless pen tablet for use with projectors
Hide thumbs Also See for TB-1:
Table of Contents

Advertisement

Wireless Adapter


This tablet comes with a wireless adapter designed for it. Do not connect it to any port
other than the USB TYPE A port of the speci¿ ed projector.

Radio waves used by the tablet
The tablet uses radio waves in the 2.4 GHz band. A radio license is not required for
using the tablet, but follow the instructions below.
1.
Do not use in close proximity to the following devices. Electromagnetic interference
may cause the device(s) to malfunction and the tablet may become dif¿ cult to use.
Aircraft
Industrial, scienti¿ c or medical devices, such as microwave ovens, pacemakers, etc.
Indoor wireless stations used for motion detection on factory production lines (radio
station requiring a license)
Speci¿ c low-power radio stations (radio station not requiring a license)
IEEE802.11g/b wireless LAN equipment
2.
Some usage environments may experience deteriorated transmission speeds and/
or impaired transmission due to electromagnetic interference. Electromagnetic
interference occurs readily around metals, such as reinforced steel, and concrete
structures.
3.
The region or country where the tablet is used will have restrictions based on
their radio laws. Check the "Rules and Regulations" below and use the tablet
accordingly.

Rules and Regulations

The tablet may not be used in countries or regions other than the following: United States,
Canada, EU, Saudi Arabia, Japan, Malaysia, Singapore and Australia. For more detail,
consult with your dealer.
For other rules and regulations, refer to "Regulatory Notices" at the end of this manual.
Cautions on Use
8

Advertisement

Table of Contents
loading

Table of Contents