Table of Contents
Advertisement
Using the Function Keys
The function keys at the top of the
tablet's operation area have the following
functions. To use a function key, touch it
for about one second.
1.
Projector Power On/Off
Toggles the projector off and on.
If you toggle this key to off, a con¿ rmation message appears on the projector screen. If
you leave the message as is, it will disappear after a few seconds, but touching this key
again while it is displayed turns the projector off.
NOTE
•
This key can be used instead of the
panel or the remote control. For more information, cross-reference with the projector's
user's manual.
•
If you turn the projector off while using the drawing function, any unsaved drawings
will be lost.
2.
Start Drawing Mode
Enables the drawing function and displays the tool bar on the projector's screen.
3.
Thumbnail Display
Displays ¿ les saved on a USB memory device connected to the USB TYPE A port
of the projector as a thumbnail as an input signal. You can display an image onto the
projector screen by touching its thumbnail.
NOTE
•
If the
USB TYPE A port is selected ¿ rst, thumbnails are displayed automatically. For
more detailed information on thumbnail display, refer to the explanation in "PC-LESS
Presentation" in the user's manual of the projector.
•
If multiple USB memory devices are connected to a projector, and the image
displayed on screen is from an USB memory device, it will display the saved content
of that USB memory device. If the image displayed on screen is from a source other
than the USB memory devices, it will display the content saved on the ¿ rst USB
memory device detected by the projector.
Using the Tablet
Fig. 6 Function keys
STANDBY/ON buttons on the projector's control
17
Advertisement
Table of Contents
