Sd Card; Pc Communication - Ectaco Partner P900 User Manual

® ®
ECTACO Partner P900
The battery compartment is located on the back of the device and is covered with a
plastic cover.
To open the battery compartment, unscrew two screws, holding the battery compartment
cover.
How to Recharge the Battery
Note: Only a special rechargeable battery, special charger, and special USB cable may
be used with your ECTACO
supply may cause failure of the device and will void the warranty.
Connect the AC/DC adapter to your device via the mini-USB port (see General View),
or connect your device to your PC using the special USB cable. The red LED signal
shows that the battery is recharging.
LED status: blinking blue – recording is in progress or data being transferred; blinking red
– the battery is critically low.
Note: Charge the battery overnight prior to the first use of the device.
Before you start using your ECTACO
(included in the standard package) is installed into the SD slot of the device. If the card is
not installed, slide it into the slot located on the right-hand edge of the device – the label
of the card face up, contacts face down. Push the card gently until it clicks into place. To
eject the card, just push it in slightly.
The PC Communication function allows you to manage files and folders stored on the SD
card. For example, you may wish to add books and music files.
Ensure the SD card is installed into the device.
Turn the device on.
Connect the device to your PC using the special USB cable and the mini-USB port
located on the device (see General View).
Please wait while your PC detects the device. On the device screen, you will see the
Device is ready to work with PC message.
Navigate to the newly detected removable disk on your PC to browse through the files
stored on the SD card.
Note: Do not modify the content of the system folder. Do not delete system files.
® ®
Partner P900. Use of an inappropriate external power

SD Card

® ®
Partner P900, please make sure the SD card

PC Communication

8
User Manual