Charging The Scala Rider; Cardo Community Platform - Cardo Systems scalarider q1 User Manual

2. CHARGING THE SCALA RIDER

Make sure that your scala rider is fully charged for at least 4 hours
before initial use.
Charging with the wall charger is faster than via a computer USB
port.
• RED LED ON – Charging • RED LED OFF – Charging complete
Battery In Standby, press "V+" for 2 seconds.
Check
• BLUE = Full • PURPLE = Half • RED = Almost empty
IMPORTANT:
scala rider Q1
The is certified as waterproof and dustproof
(IP67). However, when in use, the USB silicone cover
should be kept tightly closed to prevent moisture from
entering the unit.

3. CARDO COMMUNITY PLATFORM

Visit http://community.cardosystems.com for the following
features:
• Register your device for warranty and technical support
• Download and install the latest software upgrades*
• Customize settings*
Make sure to have your product serial number ready which can
be found on the white label on the back of the unit.
*Minimum requirement: Windows® XP or later / Mac OS X® 10.5 or later
Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other
countries.
scala rider Q1 / Q1 TeamSet™
®
|
5