Core Logic - Mitsubishi Electric TN810 ATX User Manual

     
               
   

 


The FC810 microATX motherboard accepts the following Celeron™ processors operating at a
bus speed of 66 or 100MHz.
The processor core voltages are generated by switched-mode regulators on the motherboard to
the Intel VRM8.2 specification.
   
The core logic is based around the Intel 810 Graphics and Memory Controller Hub (GMCH) and
the I/O Controller Hub (ICH). The features of each are summarised below.


66/100Mhz system bus frequency


DRAM controller supporting 100Mhz SDRAM main memory 8MB – 256MB and suspend
to RAM (PC100)


Integrated graphics controller with 2D/3D H/W acceleration


3D graphics visual/ textural enhancements


Integrated 24-bit 230MHz RAMDAC


Integrated graphics memory controller with display cache interface – 100Mhz SDRAM


Advanced power management functions - ACPI / APIC
MITSUBISHI ELECTRIC MOTHERBOARD DIVISION
266
300
333
366
400
433
466
500
550
600
4.0
4.5
5.0
5.5
6.0
6.5
7.0
5.0
5.5
6.0
         
66
66
66
66
66
66
66
100
100
100
PAGE 17 OF 46