Programmable Function Keys - NEC Xen IPK II User Manual

Programmable Function Keys

To program a Programmable Function key:
Press Speaker
Dial 751.
Press the Programmable Function key to be programmed.
Dial the code for the desired feature plus additional data if required (refer to
the following table).
Press Speaker
Note 1: Service Code 00 will erase the function from the key.
In some cases, the Hold key needs to be pressed before pressing the
Note 2:
Speaker key to hang up.
Feature Code Listing
Feature
Code
00 Erase Key
01 DSS / One-Touch
02 Microphone Key (ON/OFF)
03 DND Key
04 BGM (ON/OFF)
05 Headset
06 Transfer Key
07 Conference Key
08 Incoming Call Log
09 Day/Night Mode Switch
10 Call Forward - Immediate
11 Call Forward - Busy
12 Call Forward - No Answer
13 Call Forward - Busy/No Answer
14 Call Forward - Both Ring
15 Follow Me
18 Text Message Setup
19 External Group Paging
20 External All Call Paging
21 Internal Group Paging
22 Internal All Call Paging
23 Meet-Me Answer to Internal Paging
24 Call Pickup
25 Call Pickup for Another Group
26 Call Pickup for Specified Group
27 Speed Dial -System
28 Speed Dial - Group
29 Repeat Redial
30 Save Number Dialled
31 Memo Dial
32 Meet - Me Conference
Function Additional Data
Extension number or any numbers (up to
24 digits). Press HOLD to write.
Mode number (1~8)
Message Numbers (01~20)
External Paging Number (1~8)
Internal Paging Number (01~64)
Call Pickup Group Number
Speed Dial Buffer Number (System)
Speed Dial Buffer Number (Group)
23