Repeat Redial - NEC Xen IPK II User Manual

Repeat Redial

Set
After originating a busy or unanswered outside call:
Press Feature + Redial
-OR-
Press Repeat Redial
-OR-
Press Rpt softkey
Press Speaker to hang up
Call is repeatedly dialled until answered, cancelled or the maximum number
of redial attempts is reached
Lift the handset when the called party answers
Note 1: Your Repeat Redial key flashes while you wait for the system to redial.
Note 2: System programming determines waiting time and number of redial attempts.
Cancel
Press Feature + Redial
-OR-
Press Repeat Redial key (Code 29)
Caller ID
Answer
Receive incoming ringing or transferred outside call:
Review telephone display for calling party's name or number
Answer call accordingly
Call History List
An unanswered call will cause the Call History key (Code 08) to flash. If enabled in
programming, the telephone's display will show "CHECK LIST":
Press Call History key (Code 08)
-OR-
Press the LIST then CID softkeys
Press the ARROW DOWN Softkey to scroll through the list of numbers in
memory
Press the DEL Softkey to delete the entry and scroll to the next entry
The Call History key will remain lit as long as entries remain in memory
To place a call back to the number displayed, press Speaker or a Line key
Note 1: The last 50 calls received with caller ID information are stored.
Note 2: A missed (unanswered) call is indicated by a
Press lit Line Key to review calling party's name or number while the call is in
Note 3:
progress. If Privacy Release is enabled, press Help and Exit keys to then
restore the Privacy Release condition.
key (Code 29)
next to the call record number.
13