Changing The Coolant; Checking The Brake Fluid Level - Hyundai i10 Owner's Manual

Maintenance
G070200AEN-UK

Changing the coolant

Have coolant changed by a HYUNDAI
authorised repairer according to the
Maintenance Schedule at the beginning
of this section.
CAUTION
WARNING -
Coolant
• Do not use radiator coolant or
antifreeze in the washer fluid
reservoir.
• Radiator coolant can severely
obscure visibility when sprayed
on the windscreen and may
cause loss of vehicle control or
damage to paint and body trim.
7 20
BRAKE FLUID
G080100APA-UK

Checking the brake fluid level

Check the fluid level in the reservoir peri-
odically. The fluid level should be
between MAX and MIN marks on the
side of the reservoir.
Before removing the reservoir cap and
adding brake fluid, clean the area around
the reservoir cap thoroughly to prevent
brake fluid contamination.
If the level is low, add fluid to the MAX
level. The level will fall with accumulated
mileage. This is a normal condition asso-
ciated
with the wear of the brake linings. If the
fluid level is excessively low, have the
brake system checked by a HYUNDAI
authorised repairer.
Use only the specified brake fluid. (Refer
to "Recommended lubricants or capaci-
OPA077006R
ties" in section 9.)
Never mix different types of fluid.
WARNING -
In the event the brake system
requires frequent additions of fluid,
the vehicle should be inspected by
a HYUNDAI authorised repairer.
Loss of brake
fluid