Changing The Filter - Jura IMPRESSA Z9 One Touch TFT Instructions For Use Manual

Changing the filter

E After 2000 oz (60 liters) of water have flowed through, the
filter will cease to work. Your IMPRESSA will automatically
prompt you to change the filter.
E After three months, the filter will cease to work. Set the date
on the date plate on the filter holder in the water tank.
E If the CLEARYL Blue filter cartridge is not activated in program-
ming mode, you will not be prompted to change the filter.
E CLEARYL filter cartridges are available from specialized
dealers.
Precondition: 'Change the filter'
up.
O T Press the P button.
'Maintenance status (1/7)'
T Press the 'Change the filter'
'Approximate duration 2 min.'
T Press the 'Start'
'Use only original JURA maintenance products!'
T Press the 'Start'
'Change filter.'
T Remove and empty the water tank.
T Open the filter holder and remove the old CLEARYL Blue
filter cartridge.
T Fit the filter extension on top of a new filter cartridge.
T Insert the new filter cartridge into the water tank, exerting
slight pressure.
T Close the filter holder. It will click into place audibly.
E After three months, the filter will cease to work. Set the date
on the date plate on the filter holder in the water tank.
T Fill the water tank with fresh, cold water and reinsert the tank.
T Place a receptacle (at least 17 oz or 500 ml) under the
cappuccino frother.
T Press the
'Next'
'Filter is being
frother.
E You can interrupt rinsing of the filter at any time by pressing
any button. Press the Rotary Switch k to continue rinsing of
the filter.
is displayed and the P button lights
button.
button.
button again.
button.
rinsed.', water flows out of the cappuccino
5 Maintenance
43