Building In The Appliance; Weight Of The Furniture Door; Building Into A Peninsular Run - Miele K 9457 iD-4 Operating And Installation Manual

Building in the appliance

All fitting instructions given are for a
right hand hinged appliance. If you
have converted the appliance to left
hand hinging you will need to adapt
these instructions accordingly.
To install the appliance you will need
the following:
– a cross-slotted screwdriver,
– a selection of Torx screwdrivers,
– a hexagon spanner.

Weight of the furniture door

Before fitting a furniture door, ensure
that the weight of the door does not
exceed the maximum permitted:
Appliance
K 9457 iD-4
K 9557 iD-3/-4
K 9757 iD-3
Fitting a door which is heavier than
the maximum permitted could
damage the hinges.
46
Maximum weight of
furniture door in kg
19
20
23

Building into a peninsular run

When built into a peninsular run, the
rear of the building-in niche must be
fitted with a kitchen furniture panel.
Aligning the housing unit
The housing unit must be carefully
aligned using a spirit level before
installing the appliance. The unit
corners must be at right angles, as
otherwise the furniture door will not
align correctly with the 4 corners of the
appliance.