Firmware Updating - Panasonic DMP-BD35 Operating Instructions Manual

Setting the proxy server
In most cases, default settings can normally be used without making
any changes.
Please use this setting when instructed to by your Internet service
provider.
1 Press [SETUP].
2 Press [3, 4] to select "Network Settings" and
press [OK].
3 Press [3, 4] to select "Proxy Server Settings"
and press [OK].
Proxy Server Settings
Initialize
Proxy Address
Proxy Port Number
OK
RETURN
4 Press [3, 4] to select "Proxy Address" and
press [OK].
≥The text entry screen is displayed.
Text field: shows the text you have entered
Proxy Address
_
1 1 2 3 4 5 6 7 8 9 0
2 A B C
3
D E F
4 G H I
Delete 5 J K L
6
M N O
Finish
7 P Q R S
8 T U V
9
W X Y Z
0 .
OK
0 -- 9
RETURN

Firmware updating

When this unit remains connected to the Internet, it will automatically check for the
latest firmware version when it is turned on.
When latest firmware version is available, the following screen is displayed.
Select "Yes" or "No".
≥If "Yes" is selected, then follow the on-screen instructions.
≥If "No" is selected, then manually update the firmware later. (
After the latest firmware is downloaded, the system will be restarted and the firmware
will be updated.
When the system is restarted, the screen display disappears
and "START" is displayed on the unit's display.
After the firmware is updated and the system is restarted, the following screen
indicates that the firmware update has been completed.
≥During the update process, no other operations can be performed. Serious damage
may occur if you turn off the unit and/or press any buttons.
RQT9248
12
0
+ - *
a b c
d e f = %
/
g h i
# $ &
j k l < > @
m n o [ ] _
p q r s ( )
~
t u v { }
w x y z
\ I
` ^
" ' : ;
, ? !
Space
Firmware Update
The latest firmware is available.
Latest Online Version: x.x
Current Installed Version: x.x
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.net/support/
Yes No
The firmware has been updated.
Current Installed Version: x.x
OK
RETURN
5 Press [3, 4, 2, 1] to select a character and
press [OK].
Repeat this step to enter other characters.
≥Press [;] to delete.
6 Press [∫] when you complete the entry.
7 Press [3, 4] to select "Proxy Port Number"
and press [OK].
8 Enter numbers with the numbered buttons and
press [OK].
Proxy Port Number
Input HTTP Proxy server port number and
press [OK]. The character below can be
deleted with [CANCEL]. The number will be
set to "0" if all characters are deleted and
[OK] is pressed.
0
0 - 9 Num ber
9 Press [2, 1] to select "Yes" and press [OK].
≥The specified ports may be blocked and not be able to
be used depending on the network environment.
In order to restore the default settings
TIPS
After performing steps 1–3
1) Press [3, 4] to select "Initialize" and press [OK].
2) Press [2, 1] to select "Yes" and press [OK].
Using the numbered buttons to enter characters
e.g., entering the letter "F"
1) Press [3] to move to the 3rd row.
2) Press [3] twice to highlight "F".
3) Press [OK].
NOTE
TIPS
right)
≥Downloading will require several minutes. It
may take longer or the Internet may not be
connected depending on the connection
environment. It is required that you use a
broadband connection.
≥If downloading on this unit fails or this unit is
not connected to the Internet, then you can
download the latest firmware from the
following website and burn it to a CD-R to
update the firmware.
http://panasonic.net/support/
(This site is in English only.)
≥When the unit is connected to the Internet,
communication charges may be generated.
≥If you do not want to check for the latest
firmware version when the unit is turned on,
set "Automatic Update Check" to "Off".
( 27)
Manually updating the firmware
If the firmware update is not carried out when
the unit is turned on, a message is displayed
when displaying the FUNCTIONS menu.
The latest firmware is available.
Please update firmware in Setup.
You can manually update the firmware.
1) Press [SETUP].
2) Press [3, 4] to select "General" and
press [OK].
3) Press [3, 4] to select "Firmware Update"
and press [OK].
4) Press [3, 4] to select "Update Now" and
press [OK].
5) Press [2, 1] to select "Yes" and press
[OK].