Chapter 10 Using Gps Navigation; Introduction; Software Installation; Es400 Gps Setup - Motorola ES400 User Manual

Chapter 10 Using GPS Navigation

Introduction

The ES400 includes Global Positioning System (GPS) technology. GPS technology is based on a worldwide
system of GPS satellites orbiting the earth that continuously transmit digital radio signals. These radio signals
contain data on the satellites' locations and their exact clock time and are used to determine your location on the
earth.
!
WARNING

Software Installation

Third-party GPS navigation software is required. Evaluation software is available from various suppliers. For
example; VisualGPS, visit: http://www.visualgps.net/VisualGPSce/
If interested in purchasing GPS navigation software check with the GPS software vendor (before purchasing,
downloading, or installing any software) to determine that the application is compatible with the ES400. Refer to the
application's user guide for application installation and setup information.

ES400 GPS Setup

The GPS-enabled ES400 automatically manages access to the GPS receiver to allow multiple programs to
simultaneously access GPS data.
By default, the ES400 has the following settings:
1. Tap Start > Settings > System > External GPS icon.
2. In the Programs tab, the GPS program port is set to COM6.
3. In the Hardware tab, the GPS hardware port is set to None.
When using the ES400 in a vehicle, it is the user's responsibility to place, secure and use in a
manner that will not cause accidents, personal injury or property damage or obstruct their view. It
is the responsibility of the driver to operate the vehicle in a safe manner, maintain observation of
all driving conditions at all times, and not become distracted by the device to the exclusion of safe
driving practices. It is unsafe to operate the controls of the device while driving.