American Standard Evolution UL 1795 Specification Sheet

EVOLUTION™ CORNER
Comfortable two person design with dual back
support positions, integral seat and installed grab
bar. Includes factory installed Safe-T-Heat
Whirlpool Heater.
❏ 6060V Whirlpool
• Acrylic with fiberglass reinforcement
• 2.1 HP self-draining pump/motor
• Ten flow adjustable jets including:
- Two adjustable Comfort Jets™ Hi Flo
- Eight adjustable Comfort Jets™
• Three silent air volume controls
• Side-mounted On/Off control
• Complete factory installed and tested
whirlpool system
• Pre-installed Safe-T-Heater Whirlpool Heater
❏ 6060VC Whirlpool W/EverClean
• Same as above with the EverClean System
Nominal Dimensions:
1384 x 1384 x 546mm
(54-1/2" x 54-1/2" x 21-1/2")
Installed Size:
1949 x 1661 x 546mm
(76-3/4" x 65-3/8" x 21-1/2")
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
American Standard whirlpools with EverClean
incorporate a patented silver-ion additive right
into the circulation piping to protect the pipes
from mold, mildew, algae and fungus that could
cause deterioration or staining of the pipes.
SEE REVERSE FOR PRODUCT DIMENSIONS
AND SPECIFICATIONS
© 2008 AS America Inc.
System
®
Components Required:
❏ Bath Filler*: (specify finish)
❏ Bath Drain: 1583.470 (specify finish)
Custom Accessories Available:
❏ Corner Apron: 0707.200 (specify color)
❏ Tile Bead Kit: 751755-100
* See American Standard Faucet Selector
For color/finish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
®
NOTE: The Safe-T-Heater is designed to maintain water tem-
perature during operation. It will not heat cold water to desired
bathing temperature.
H99
EVOLUTION™
CORNER WHIRLPOOL
HIGH GLOSS
Revised 2/08