Advertisement
Table of Contents
- 1 Thank You
- 2 Table of Contents
- 3 Safety Instructions
- 4 General Information
- 5 Optional Components
- 6 Specifications
- 7 Roughing-In Reference
- 8 Roughing-In Reference
- 9 Framing and Support Instructions
- 10 Mounting Instructions
- 11 Electrical Connections
- 12 6060L/V Corner EZ-Install Heater
- 13 Operation
- 14 Drain Connection and System Test
- 15 Care and Cleaning
- 16 Warranty
- Download this manual
INSTALLATION & OPERATION GUIDE FOR
MODEL 2422L / V
MODEL 6060L / V
MODEL 2771L / V
MODEL 2645L / V
MODEL 7236L / V
MODEL 2425L / V - LHO
MODEL 2425L / V - RHO
MODEL 2908L
MODEL 2711L
MODEL 2773L
MODEL 2774L
MODEL 2775L
MODEL 2732L
THANK YOU...
for selecting an American Standard bath. Your new bath is shipped to you after careful inspection. The
whirlpool version is completely assembled with pump, motor, and system piping. All you need to finish the
whirlpool installation are your selected fittings and electrical connections.
To insure maximum performance and pleasure from this product, please follow the instructions and cautions.
FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.
© AS Americas Inc. 2010
All product names listed herein are trademarks
of AS Americas Inc. unless otherwise noted.
EVERCLEAN
WHIRLPOOLS AND BATHTUBS
™
/ EVOLUTION
5' x 32"
CORNER
5' x 36"
OVAL
6' x 36"
5' x 32" IA-LHO
5' x 32" IA-RHO
REMINISCENCE
ELLISSE
CADET 6' x 36"
CADET 6' x 42"
CADET CORNER
5' x 32"
1
™
753737-100 Rev. E
Advertisement
Table of Contents
Related Manuals for American Standard 2422L / V
Summary of Contents for American Standard 2422L / V
-
Page 1: Thank You
MODEL 2732L THANK YOU... for selecting an American Standard bath. Your new bath is shipped to you after careful inspection. The whirlpool version is completely assembled with pump, motor, and system piping. All you need to finish the whirlpool installation are your selected fittings and electrical connections. -
Page 2: Table Of Contents
TABLE OF CONTENTS: Safety Instructions...Page 3 General Information...Page 4 Optional Components...Page 4 Specifications...Page 5 Roughing-in Reference...Page 6-9 Framing and Support Instructions...Page 10 Mounting Instructions...Page 11 Electrical Connections...Page 12 6060L/V Corner EZ-Install Heater...Page 13 Operation...Page 14-15 Drain Connection and System Test...Page 16 Care and Cleaning... -
Page 3: Safety Instructions
Use this unit only for its intended use as described in this manual. Do not use any attachments not recommended by American Standard. The unit must be connected only to a supply circuit that is properly protected by a ground-fault circuit-interrupter (GFCI). -
Page 4: General Information
For electrical requirements, refer to section titled “Whirlpool Electrical Installation Instructions” . Check for availability of optional American Standard wall tiling bead (required for recess installation). Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth. -
Page 5: Specifications
L 1949mm (76-3/4") A 18" C 19-1/2" Corner* W 1661mm (65-3/8") (457mm) (495mm) H 546mm (21-1/2") B 13-3/4" (349mm) 2422L / V L 1524mm (60") A 20-1/8" C 20" 5' x 32" W 813mm (32") (511mm) (508mm) H 546mm (21-1/2") B 11"... -
Page 6: Roughing-In Reference
5' x 32" (MODEL 2422L / V) PROVIDE ACCESS TO PUMP FOR SERVICING ON ALL INSTALLATIONS 5' x 36" (MODEL 2771L / V) PROVIDE ACCESS TO PUMP FOR SERVICING ON ALL INSTALLATIONS DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7. - Page 7 OVAL (MODEL 2645L / V) 66" (1676mm) 18" (457mm) CUT OUT IN FLOOR FOR DRAIN PROVIDE ACCESS TO PUMP FOR SERVICING ON ALL INSTALLATIONS PROVIDE ACCESS TO PUMP FOR SERVICING ON ALL INSTALLATIONS CORNER (MODEL 6060L / V) 76-3/4" (1949mm) 54-1/2"...
- Page 8 CADET CORNER (MODEL 2775L) RECOMMENDED FITTING LOCATION 64 X 330mm (2-1/2 X 13") OUTLINE OF CUTOUT 1080 mm (42-1/2") REMINISCENCE (MODEL 2908L) 330mm (13") 914mm (36") 229 x 305mm (9 X 12) 457mm FLOOR (18) CUTOUT 64mm REF. INTEGRAL (2-1/2) FITTING DECK 152mm...
-
Page 9: Roughing-In Reference
CADET 6' x 42" (MODEL 2774L) 305mm RECOMMENDED FITTING LOCATION (12") 229mm (9") 19mm (3/4") FINISHED WALL 229mm (9") 1067mm (42") CUTOUT IN FLOOR 533mm FOR DRAIN (21") 57mm (2-1/4") (8) JETS C/L OF DRAIN 5' x 32" (MODEL 2732L) (1524mm) PROVIDE ACCESS TO... -
Page 10: Framing And Support Instructions
STRINGERS FRONT EDGE OF BATH MUST BE SUPPORTED BY STUD WALL OR ACCESS PANEL MUST BE LOCATED AMERICAN STANDARD ON THE SAME SIDE AS THE MOTOR. APRON KIT ALLOW OPEN FRAMING ON PUMP/MOTOR END FOR SERVICE. ACCESS PANELS NOT REQUIRED FOR BATH TUBS. -
Page 11: Mounting Instructions
TYPICAL FLANGE MOUNTING DETAIL SUGGESTED WHIRLPOOL / BATH INSTALLATION METHOD WOOD STUD STUDS WATERPROOF DRYWALL OR CEMENT BOARD TILE ROOFING NAIL SEALANT 1 x 3 (25 x 76mm) WOOD STRINGER FULL LENGTH STEEL STEEL STUD STUDS WASHER WATERPROOF DRYWALL OR CEMENT BOARD TILE SEALANT 1 x 3 (25 x 76mm) WOOD... - Page 12 WHIRLPOOL ELECTRICAL INSTALLATION INSTRUCTIONS All wiring must be performed by a licensed electrician in accordance with the national electrical code and all other applicable codes. WARNING: When using electrical products, basic precautions should always be observed, including the following: 1. DANGER: RISK OF ELECTRIC SHOCK! Connect only to a circuit protected by a ground-fault circuit interrupter. 2.
-
Page 13: Operation
For 6060L/V Corner Only OPERATION WARNING: Prior to operation, review the Important Safety Instructions listed at the beginning of this instruction manual. Once the heater is installed and the whirlpool pump is operating, the heater is totally automatic. The heater will help maintain the temperature of the water in the bath. - Page 14 OPERATION: NOTE: Each whirlpool is shipped from the factory with an air actuator on/off switch and pump with attached power supply cord. OPERATING THE SYSTEM WITHOUT WATER (DRY RUNNING) WILL CAUSE PUMP DAMAGE AND VOID THE WARRANTY. Always fill the whirlpool before operating the pump. The air switch is mounted either on the deck or side wall of the tub.
- Page 15 Adjustable Flow Clean Jet™: The water flow action may be adjusted from vigorous to soft by rotating the nozzle counterclockwise for vigorous and clockwise for soft. NOTE: You may balance the air volume control and nozzle adjustment for the most desirable condition. Small Jet Softer Massage (counter-clockwise)
-
Page 16: Drain Connection And System Test
DRAIN CONNECTION AND SYSTEM TEST Using recommended drain assembly, connect whirlpool drain to waste line in accordance with the drain assembly instructions. Tighten all drain joints securely. Check the pump couplings and make sure they are hand-tight. Clean the whirlpool and fill with water to a point 2"... -
Page 17: Warranty
AS America (“American Standard”) warrants to the original consumer purchaser that it will, at its option, repair or replace this whirlpool or any of its parts that are found by American Standard, in its sole judgment, to be defective under normal residential use and maintenance so long as it is owned by the original consumer purchaser.
Need help?
Do you have a question about the 2422L / V and is the answer not in the manual?
Questions and answers