Table of Contents
Advertisement
www.reebok tness.com
Model No. RBTL99013.0
USER’'S MANUAL
Serial No.
Write the serial number in the space
above for reference.
Serial
Number
Decal
ACTIVATE YOUR
WARRANTY
To register your product and
activate your warranty today,
go to www.reebokservice.com/
registration.
CUSTOMER CARE
For service at any time, go to
www.reebokservice.com.
Or call 1-877-994-4999
Mon.––Fri. 6 a.m.––6 p.m. MT
Sat. 8 a.m.––4 p.m. MT
Please do not contact the store.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Advertisement
Table of Contents
Related Manuals for Reebok 910 Treadmill
Summary of Contents for Reebok 910 Treadmill
- Page 1 Model No. RBTL99013.0 USER’’S MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to www.reebokservice.com/ registration. CUSTOMER CARE For service at any time, go to www.reebokservice.com.
-
Page 2: Table Of Contents
Apply the decal in the location shown. Note: The decals may not be shown at actual size. REEBOK and the Vector Logo are registered trademarks and service marks of Reebok. This product is manufactured and distributed under license from Reebok International. -
Page 3: Important Precautions
4. The treadmill is intended for home use only. REEBOK dealer, call the telephone number Do not use the treadmill in any commercial, on the front cover of this manual, or see your rental, or institutional setting. - Page 4 20. The heart rate monitor is not a medical 24. Do not change the incline of the treadmill by device. Various factors, including the user’’s placing objects under the treadmill. movement, may affect the accuracy of heart rate readings. The heart rate monitor is 25.
- Page 6 STANDARD SERVICE PLANS...
-
Page 7: Before You Begin
Thank you for selecting the revolutionary reading this manual, please see the front cover of this REEBOK 910 treadmill. The 910 treadmill offers an manual. To help us assist you, please note the product ® impressive selection of features designed to make your model number and serial number before contacting us. -
Page 8: Part Identification Chart
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly. -
Page 9: Assembly
ASSEMBLY •• To hire an authorized service technician •• Left parts are marked ““L”” or ““Left”” and right parts to assemble your exercise equipment, call are marked ““R”” or ““Right.”” 1-800-445-2480. •• To identify small parts, see page 8. •• Assembly requires two persons. ••... - Page 10 3. Pull the Upright Wire (76) and the base ground wire (A) through the indicated hole in the Base (92). Square Attach the base ground wire (A) to the Base (92) Hole with a #8 x 1/2" Ground Screw (10). Hole Make sure that the Grommet (90) is pressed into the square hole in the Base (92).
- Page 11 5. Hold the Left Upright (87) against the Base (92). Be careful not to pinch any wires. Insert two 3/8" x 2 3/4" Screws (7) and two 3/8" x 1 1/4" Screws (8) with two 3/8" Star Washers (14) into the Left Upright.
- Page 12 7. Identify the Left Handrail (81), and hold it near the Left Upright (87). Bracket Tie the wire tie in the Left Handrail (81) securely around the end of the Upright Wire (76). Then, pull the other end of the wire tie until the Upright Wire is routed through the Left Handrail.
- Page 13 9. Set the console assembly face down on a soft surface to avoid scratching the console assembly. Remove the eight indicated Screws (C). Next, lift off the Crossbar (104) and the Console Frame (98). Discard the eight Screws. Console Assembly 10.
- Page 14 11. Attach the Console Frame (98) to the Handrails (81, 85) with four 5/16" x 1 1/2" Screws (4) and four 5/16" Star Washers (12). Start all four Screws, and then tighten them. 12. With the help of a second person, hold the con- sole assembly near the Left Handrail (81).
- Page 15 13. Set the console assembly on the Left Handrail (81) and the Right Handrail (85). Be careful not Console to pinch any wires. Insert the excess Upright Assembly Wire (not shown) into the Left Handrail. Attach the console assembly with six #8 x 1/2" Screws (1) and two #8 x 3/4"...
- Page 16 15. Firmly tighten the four 3/8" x 2 3/4" Screws (7). Then, tighten the four 3/8" x 1 1/4" Screws (8) (only one side is shown). Press the Left Base Cover (78) and the Right Base Cover (89) onto the Base (92) until they snap into place.
-
Page 17: The Chest Heart Rate Monitor
THE CHEST HEART RATE MONITOR HOW TO PUT ON THE HEART RATE MONITOR •• Do not expose the heart rate monitor to direct sun- light for extended periods of time; do not expose it The heart rate to temperatures above 122° F (50° C) or below 14° monitor consists of F (-10°... -
Page 18: Operation And Adjustment
OPERATION AND ADJUSTMENT HOW TO CONNECT THE POWER CORD nominal 120-volt circuit capable of carrying 15 or more amps. To avoid overloading the circuit, do Use a Surge Suppressor not plug other electrical devices, except for low- power devices such as cell phone chargers, into Your treadmill, like other electronic equipment, can be the surge suppressor or into an outlet on the same damaged by sudden voltage changes in your home’’s... - Page 19 CONSOLE DIAGRAM FEATURES OF THE CONSOLE You can even listen to your favorite workout music or audio books with the console’’s stereo sound system The treadmill console offers an impressive array of while you exercise. features designed to make your workouts more effec- tive and enjoyable.
- Page 20 HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before you turn on the power. If you do See HOW TO TURN ON THE POWER at the left.
- Page 21 4. Change the incline of the treadmill as desired. The My Trail tab will show a track that represents 1/4 mile (400 m). As you exercise, the white rect- To change the incline of the treadmill, press the angle will show your progress. The My Trail tab will Incline increase or decrease button or one of the also show the number of laps you complete.
- Page 22 6. Measure your heart rate if desired. 8. When you are nished exercising, remove the key from the console. Note: If you use the handgrip heart rate moni- tor and the chest heart rate monitor at the same Step onto the foot rails, press the Stop button, and time, the console will not display your heart adjust the incline of the treadmill to the lowest rate accurately.
- Page 23 HOW TO USE AN ONBOARD WORKOUT The workout will continue in this way until the last segment of the pro le ashes in the display and the 1. Insert the key into the console. last segment ends. The walking belt will then slow to a stop.
- Page 24 HOW TO USE AN IFIT WORKOUT will walk or run, and the approximate number of calories you will burn. The display may also show Note: To use an iFit workout, you must have an the name of the workout. If you select a competition optional iFit module.
- Page 25 THE INFORMATION MODE into the reset position, and insert the key into the console. However, when you remove the key, the The console features an information mode that keeps displays will remain lit, although the buttons will not track of treadmill information and allows you to person- function.
-
Page 26: How To Fold And Move The Treadmill
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline Before moving the treadmill, fold it as described at the to the lowest position before you fold the treadmill. left. -
Page 27: Troubleshooting
TROUBLESHOOTING Most treadmill problems can be solved by following c. Remove the key from the console, and then the simple steps below. Find the symptom that reinsert it. applies, and follow the steps listed. If further assis- tance is needed, see the front cover of this manual. d. - Page 28 Locate the Reed Switch (51) and the Magnet (50) b. If the walking belt is overtightened, treadmill per- on the left side of the Pulley (49). Turn the Pulley formance may decrease and the walking belt may until the Magnet is aligned with the Reed Switch. become damaged.
- Page 29 SYMPTOM: The walking belt is off-center or slips b. If the walking belt slips when walked on, rst when walked on remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller a. If the walking belt is off-center, rst remove the screws clockwise, 1/4 of a turn.
-
Page 30: Exercise Guidelines
EXERCISE GUIDELINES Burning Fat——To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy. -
Page 31: Part List
PART LIST Model No. RBTL99013.0 R1212A Key No. Qty. Description Key No. Qty. Description #8 x 1/2" Screw Drive Motor #8 x 3/4" Screw Drive Motor Belt 3/8" x 2" Bolt Frame 5/16" x 1 1/2" Screw Right Rear Foot 5/16"... -
Page 32: Exploded Drawing
EXPLODED DRAWING A Model No. RBTL99013.0 R1212A... - Page 33 EXPLODED DRAWING B Model No. RBTL99013.0 R1212A...
- Page 34 EXPLODED DRAWING C Model No. RBTL99013.0 R1212A...
- Page 35 EXPLODED DRAWING D Model No. RBTL99013.0 R1212A...
-
Page 36: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro- vide the following information when contacting us: •• the model number and serial number of the product (see the front cover of this manual) ••...
Need help?
Do you have a question about the 910 Treadmill and is the answer not in the manual?
Questions and answers